Pablo
Fernández de Lucio
Universidad del País Vasco/Euskal Herriko Unibertsitatea
Lejona, EspañaPublications in collaboration with researchers from Universidad del País Vasco/Euskal Herriko Unibertsitatea (25)
2024
-
Influence of the cutting-edge preparation in ceramic tools for grooving of Inconel® 718 and force prediction
Engineering Science and Technology, an International Journal, Vol. 54
-
Machining behaviour analysis of PBF-LB warped components with internal lattice microstructures
Journal of Manufacturing Processes, Vol. 121, pp. 184-192
2023
-
ANALYSIS OF THE INCLINATION OF SLOTS IN TEXTURED CERAMIC TOOLS THROUGH THE STUDY OF THE FINAL ROUGHNESS AND CUTTING FORCES DURING CUTTING OF COLD WORK TOOL STEEL
MM Science Journal, Vol. 2023-November, pp. 6901-6908
-
Investigating the self-lubricating properties of novel TiSiVN coating during dry turning of Ti6Al4V alloy
Wear, Vol. 532-533
-
On the effects of cutting-edge angle on high-feed turning of Inconel 718© superalloy
International Journal of Advanced Manufacturing Technology, Vol. 125, Núm. 9-10, pp. 4237-4252
-
Prediction of cutting forces including tool wear in high-feed turning of Nimonic® C-263 superalloy: A geometric distortion-based model
Measurement: Journal of the International Measurement Confederation, Vol. 211
-
THE EFFECT OF BROACHING TOOL CUTTING EDGES POLISHING ON PROCESS FORCES AND TEMPERATURE
MM Science Journal, Vol. 2023-November, pp. 6844-6852
-
The influence of cutting edge microgeometry on the broaching of Inconel 718 slots
Engineering Science and Technology, an International Journal, Vol. 48
-
Threading holder based on axial metal cylinder pins to reduce tap risk during reversion instant
Alexandria Engineering Journal, Vol. 66, pp. 845-859
2022
-
Analysis of the subject starting point and aspects for improvement based on the results of the student surveys
15th annual International Conference of Education, Research and Innovation, 7-9 November 2022, Seville, Spain
-
Application of active methodologies in the descriptive subject of ‘Mechanical Technology’
15th annual International Conference of Education, Research and Innovation, 7-9 November 2022, Seville, Spain
-
Nuevos procesos de torneado aplicados a turbinas aeronáuticas
XV Congreso Iberoamericano de Ingeniería Mecánica-CIBIM 2022. UPM-España
2021
-
Comparative study of finishing techniques for age-hardened Inconel 718 alloy
Journal of Materials Research and Technology, Vol. 15, pp. 5623-5634
-
Comparison between milling roughing operations in full slotting manufacturing: trochoidal, plunge and conventional milling
IOP Conference Series: Materials Science and Engineering, Vol. 1193, Núm. 1, pp. 012003
-
Effects of laser-textured on rake face in turning PCD tools for Ti6Al4V
Journal of Materials Research and Technology, Vol. 15, pp. 177-188
-
Roughing milling with ceramic tools in comparison with sintered carbide on nickel-based alloys
Coatings, Vol. 11, Núm. 6
-
Turning of Austempered Ductile Iron with ceramic tools
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 235, Núm. 3, pp. 484-493
2020
-
A precise milling of integral blade rotors by using different strategies
Proceedings of the 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020
-
Analysis of the influence of the hydrostatic ball burnishing pressure in the surface hardness and roughness of medium carbon steels
IOP Conference Series: Materials Science and Engineering
-
Combination of high feed turning with cryogenic cooling on Haynes 263 and Inconel 718 superalloys
Journal of Manufacturing Processes, Vol. 58, pp. 208-222