Publicaciones en las que colabora con Marta Ostolaza Gaztelupe (20)

2024

  1. CFD modelling of the powder segregation in multi-material laser directed energy deposition

    International Journal of Thermal Sciences, Vol. 198

  2. High-temperature tribological performance of functionally graded Stellite 6/WC metal matrix composite coatings manufactured by laser-directed energy deposition

    Friction, Vol. 12, Núm. 3, pp. 522-538

2023

  1. L-DED numerical model for sensor embedding

    International Journal of Heat and Mass Transfer, Vol. 201

  2. Latest Developments to Manufacture Metal Matrix Composites and Functionally Graded Materials through AM: A State-of-the-Art Review

    Materials, Vol. 16, Núm. 4

  3. Study of the flexural behaviour and bonding strength of WC-Co metal matrix composite coatings produced by Laser Directed Energy Deposition

    Surface and Coatings Technology, Vol. 463

2022

  1. CFD simulation for the modelling of the powder flow on continuous coaxial nozzles in the laser DED process

    Procedia CIRP

  2. Influence of process parameters on the particle–matrix interaction of WC-Co metal matrix composites produced by laser-directed energy deposition

    Materials and Design, Vol. 223

  3. Laser-testurizazio prozesurako eredu matematikoa

    Ekaia: Euskal Herriko Unibertsitateko zientzi eta teknologi aldizkaria, Núm. 42, pp. 301-316

  4. Non-symmetrical design of coaxial nozzle for minimal gas consumption on L-DED process for Ti6Al4V reactive alloy

    Journal of Manufacturing Processes, Vol. 78, pp. 218-230

  5. Normalized hardness prediction of L-DED metal matrix composite coatings for wear-resistant applications

    Procedia CIRP

2021

  1. Fabrikazio gehigarriaren iraunkortasun-azterketa: materiala aurreztea eta kontsumo energetikoa murriztea

    Ekaia: Euskal Herriko Unibertsitateko zientzi eta teknologi aldizkaria, Núm. 1, pp. 155-171

  2. Functionally graded AISI 316L and AISI H13 manufactured by L-DED for die and mould applications

    Applied Sciences (Switzerland), Vol. 11, Núm. 2, pp. 1-11

  3. Laser Engraving of Chip-Breaker Geometry on Alumina Ceramic Cutting Tools

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

  4. Machine-dynamics Monitoring for L-DED Operations

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

  5. Methodology for Embedding Mineral Insulated Cables into 1.2311 Tool Steel for the Manufacture of Smart Tooling

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

  6. Study of corrosion resistance in Ti 6Al 4V additive manufactured parts

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

2020

  1. Mejora de propiedades tribológicas mediante aporte por láser de recubrimientos de AISI H13 y WC

    Revista DYNA, Vol. 95, Núm. 4, pp. 430-435

  2. Study of the reinforcement phase dilution into the metal matrix in functionally graded Stellite 6 and WC metal matrix composite by Laser Metal Deposition

    Procedia CIRP

  3. Txirbil-harroketan erabilitako ebaketa-jariakinaren eragina laser bidezko prozesu gehigarrian konformaziorako trokelen konponketaren kasuan.

    Ekaia: Euskal Herriko Unibertsitateko zientzi eta teknologi aldizkaria, Núm. 38, pp. 327-337

2019

  1. Case Study: Modeling of the cycle time reduction in a B-Pillar hot stamping operation using conformal cooling

    Procedia Manufacturing