Publicaciones (306) Publicaciones en las que ha participado algún/a investigador/a

2024

  1. AA5754 aluminium alloy springback reduction by post forming electro plastic effect (PFEPE)

    Mechanics of Materials, Vol. 198

  2. Characterization of friction coefficient at near solidus forming (NSF) conditions using T-shape compression test

    Journal of Manufacturing Processes, Vol. 124, pp. 1259-1272

  3. Characterization of the heat transfer coefficient at near solidus forming condition using columnar pressing test

    International Journal of Advanced Manufacturing Technology, Vol. 135, Núm. 1-2, pp. 721-733

  4. Correcting distortions of thin-walled machined parts by machine hammer peening

    Chinese Journal of Aeronautics, Vol. 37, Núm. 6, pp. 439-453

  5. Effect of the loading-rate and stress state on the constitutive modelling and fracture of 2205 Duplex stainless steel

    International Journal of Impact Engineering, Vol. 191

  6. Enhancing Time-of-Flight Diffraction (TOFD) Inspection through an Innovative Curved-Sole Probe Design

    Sensors, Vol. 24, Núm. 19

  7. Gaussian process regression-driven deep drawing blank design method

    International Journal of Mechanical Sciences, Vol. 265

  8. Impact behaviour of bio-inspired sandwich panels integrally manufactured from 3D printed continuous carbon fibre reinforced polyamide

    Composites Science and Technology, Vol. 250

  9. Low-velocity impact performance of integrally-3D printed continuous carbon fibre composite sandwich panels

    Materials Letters, Vol. 354

  10. Multiphysics modeling and experimental validation of heat and mass transfer for the vacuum induction melting process

    Applied Thermal Engineering, Vol. 243

  11. Necking detection in stretch-bent materials exhibiting the Portevin-Le Chatelier effect

    Materials Research Proceedings

  12. Process Time Optimization of a Hot Stamping Line for Aluminum Automotive Components

    9th International Conference on Hot Sheet Metal Forming of High-Performance Steel, CHS2 2024 - Proceedings

  13. Sensitivity analysis of near solidus forming (NSF) process with digital twin using Taguchi approach

    Advances in Manufacturing

  14. Study of a New Novel HVOAF Coating Based on a New Multicomponent Al80Mg10Si5Cu5 Alloy

    Coatings, Vol. 14, Núm. 9

  15. Tool surface texturing by shot peening: initial results and lessons learned

    IOP Conference Series: Materials Science and Engineering

  16. Unravelling dynamic recrystallisation in a microalloyed steel during rapid high temperature deformation using synchrotron X-rays

    Acta Materialia, Vol. 278

2023

  1. A Preliminary Study on the Quality of Joining AISI 316 and AISI 3415 Steel by the Near Solidus Forming Process

    Metals, Vol. 13, Núm. 7

  2. A comprehensive experimental investigation of the rate-dependent interlaminar delamination behaviour of CFRP composites

    Composites Part B: Engineering, Vol. 261

  3. A mechanistic-finite element hybrid approach to modelling cutting forces when drilling GFRP-AISI 304 stacks

    CIRP Annals, Vol. 72, Núm. 1, pp. 69-72

  4. An automatic thermo-mechanical testing apparatus for metal forming applications

    International Journal of Impact Engineering, Vol. 182