Argitalpenak (43) Aelita Nikulina argitalpenak

2024

  1. The effect of laser surfacing modes on the geometrical characteristics of the single laser tracks

    Obrabotka Metallov, Vol. 26, Núm. 2, pp. 57-70

2022

  1. Effect of Modes of Spark Plasma Sintering on the Structure and Properties of Materials of the Ni – Cr – Si – B – C System

    Metal Science and Heat Treatment, Vol. 63, Núm. 11-12, pp. 637-643

  2. Microstructure and properties of Ni-Al coatings obtained by conventional and high-velocity atmospheric plasma spraying

    Results in Surfaces and Interfaces, Vol. 6

  3. Phase composition and fatigue crack growth behavior of Inconel 718 under additive manufacturing

    Materials Science and Engineering A, Vol. 851

  4. Structural Features of a Heat Affected Zone with Pulsed Arc Surfacing of Railway Crossovers

    Metallurgist, Vol. 65, Núm. 9-10, pp. 986-994

  5. Use of Non-Vacuum Electron Beam Cladding for Creating a Combined Joint of High-Carbon and Chromium-Nickel Steels

    Metal Science and Heat Treatment, Vol. 63, Núm. 11-12, pp. 644-649

2021

  1. Characterization of Ni-Cr-Mo alloy phase structures under DLD process

    Journal of Physics: Conference Series

  2. Effect of Heat Treatment on the Structure, Phase Composition and Impact Toughness of Inconel 718 Alloy Under Additive Manufacturing

    Photonics Russia, Vol. 15, Núm. 7, pp. 568-575

2020

  1. Analysis of laser direct stainless steel powder deposition on Ti6Al4V substrate

    Materials Letters, Vol. 274

  2. Friction Induced Structural Changes of Mangalloy Observed by Synchrotron X-Ray Diffraction and Metallographic Analysis

    IOP Conference Series: Materials Science and Engineering

  3. Gradient microstructure, mechanical properties and phase composition of Ni-Cr-Fe alloy under additive manufacturing process

    AIP Conference Proceedings

  4. Microstructural Features of Welded Railway Frogs formed by Flash Butt Welding and Pulse-Arc Cladding

    Obrabotka Metallov, Vol. 22, Núm. 2, pp. 53-62

  5. The Phase Composition of the Nickel-based Inconel 718 Alloy obtained by Additive Technology

    Obrabotka Metallov, Vol. 22, Núm. 3, pp. 69-81

2019

  1. Formation of Transition Zones Under Spark Plasma Sintering of Dissimilar Steels

    Metal Science and Heat Treatment, Vol. 60, Núm. 9-10, pp. 680-685

  2. High-Speed Direct Laser Deposition of 51Ni-14Co-10Cr-6Al-5Mo Alloy: Microstructure and Phase composition

    Materials Today: Proceedings

  3. Simulation of the Ni3Al intermetallic inclusion growth process during direct laser deposition using Ni-based superalloy powder

    Materials Today: Proceedings

  4. Structural Transformations of Carbon Ferritic-Pearlitic Steels under Conditions of High-Speed Loading

    Obrabotka Metallov, Vol. 21, Núm. 3, pp. 115-128

  5. Structure and Properties of Austenitic Steel Surface-doped with NbC

    Materials Today: Proceedings

  6. Structure and Properties of Steel 40Kh2N2MA After Thermomechanical Treatment with Martensitic-Bainitic Transformation of Austenite

    Metal Science and Heat Treatment, Vol. 60, Núm. 9-10, pp. 666-673

  7. Structure and phase composition of a Ni-based alloy formed by additive manufacturing

    Materials Today: Proceedings