Publikationen (43) Publikationen von Aelita Nikulina

2024

  1. The effect of laser surfacing modes on the geometrical characteristics of the single laser tracks

    Obrabotka Metallov, Vol. 26, Núm. 2, pp. 57-70

2022

  1. Effect of Modes of Spark Plasma Sintering on the Structure and Properties of Materials of the Ni – Cr – Si – B – C System

    Metal Science and Heat Treatment, Vol. 63, Núm. 11-12, pp. 637-643

  2. Microstructure and properties of Ni-Al coatings obtained by conventional and high-velocity atmospheric plasma spraying

    Results in Surfaces and Interfaces, Vol. 6

  3. Phase composition and fatigue crack growth behavior of Inconel 718 under additive manufacturing

    Materials Science and Engineering A, Vol. 851

  4. Structural Features of a Heat Affected Zone with Pulsed Arc Surfacing of Railway Crossovers

    Metallurgist, Vol. 65, Núm. 9-10, pp. 986-994

  5. Use of Non-Vacuum Electron Beam Cladding for Creating a Combined Joint of High-Carbon and Chromium-Nickel Steels

    Metal Science and Heat Treatment, Vol. 63, Núm. 11-12, pp. 644-649

2021

  1. Characterization of Ni-Cr-Mo alloy phase structures under DLD process

    Journal of Physics: Conference Series

  2. Effect of Heat Treatment on the Structure, Phase Composition and Impact Toughness of Inconel 718 Alloy Under Additive Manufacturing

    Photonics Russia, Vol. 15, Núm. 7, pp. 568-575

2020

  1. Analysis of laser direct stainless steel powder deposition on Ti6Al4V substrate

    Materials Letters, Vol. 274

  2. Friction Induced Structural Changes of Mangalloy Observed by Synchrotron X-Ray Diffraction and Metallographic Analysis

    IOP Conference Series: Materials Science and Engineering

  3. Gradient microstructure, mechanical properties and phase composition of Ni-Cr-Fe alloy under additive manufacturing process

    AIP Conference Proceedings

  4. Microstructural Features of Welded Railway Frogs formed by Flash Butt Welding and Pulse-Arc Cladding

    Obrabotka Metallov, Vol. 22, Núm. 2, pp. 53-62

  5. The Phase Composition of the Nickel-based Inconel 718 Alloy obtained by Additive Technology

    Obrabotka Metallov, Vol. 22, Núm. 3, pp. 69-81

2019

  1. Formation of Transition Zones Under Spark Plasma Sintering of Dissimilar Steels

    Metal Science and Heat Treatment, Vol. 60, Núm. 9-10, pp. 680-685

  2. High-Speed Direct Laser Deposition of 51Ni-14Co-10Cr-6Al-5Mo Alloy: Microstructure and Phase composition

    Materials Today: Proceedings

  3. Simulation of the Ni3Al intermetallic inclusion growth process during direct laser deposition using Ni-based superalloy powder

    Materials Today: Proceedings

  4. Structural Transformations of Carbon Ferritic-Pearlitic Steels under Conditions of High-Speed Loading

    Obrabotka Metallov, Vol. 21, Núm. 3, pp. 115-128

  5. Structure and Properties of Austenitic Steel Surface-doped with NbC

    Materials Today: Proceedings

  6. Structure and Properties of Steel 40Kh2N2MA After Thermomechanical Treatment with Martensitic-Bainitic Transformation of Austenite

    Metal Science and Heat Treatment, Vol. 60, Núm. 9-10, pp. 666-673

  7. Structure and phase composition of a Ni-based alloy formed by additive manufacturing

    Materials Today: Proceedings