Novosibirsk State Technical University-ko ikertzaileekin lankidetzan egindako argitalpenak (32)

2024

  1. The effect of laser surfacing modes on the geometrical characteristics of the single laser tracks

    Obrabotka Metallov, Vol. 26, Núm. 2, pp. 57-70

2022

  1. Effect of Modes of Spark Plasma Sintering on the Structure and Properties of Materials of the Ni – Cr – Si – B – C System

    Metal Science and Heat Treatment, Vol. 63, Núm. 11-12, pp. 637-643

  2. Phase composition and fatigue crack growth behavior of Inconel 718 under additive manufacturing

    Materials Science and Engineering A, Vol. 851

  3. Use of Non-Vacuum Electron Beam Cladding for Creating a Combined Joint of High-Carbon and Chromium-Nickel Steels

    Metal Science and Heat Treatment, Vol. 63, Núm. 11-12, pp. 644-649

2021

  1. Characterization of Ni-Cr-Mo alloy phase structures under DLD process

    Journal of Physics: Conference Series

  2. Effect of Heat Treatment on the Structure, Phase Composition and Impact Toughness of Inconel 718 Alloy Under Additive Manufacturing

    Photonics Russia, Vol. 15, Núm. 7, pp. 568-575

2020

  1. Analysis of laser direct stainless steel powder deposition on Ti6Al4V substrate

    Materials Letters, Vol. 274

  2. Gradient microstructure, mechanical properties and phase composition of Ni-Cr-Fe alloy under additive manufacturing process

    AIP Conference Proceedings

  3. Microstructural Features of Welded Railway Frogs formed by Flash Butt Welding and Pulse-Arc Cladding

    Obrabotka Metallov, Vol. 22, Núm. 2, pp. 53-62

  4. The Phase Composition of the Nickel-based Inconel 718 Alloy obtained by Additive Technology

    Obrabotka Metallov, Vol. 22, Núm. 3, pp. 69-81

2019

  1. Formation of Transition Zones Under Spark Plasma Sintering of Dissimilar Steels

    Metal Science and Heat Treatment, Vol. 60, Núm. 9-10, pp. 680-685

  2. Simulation of the Ni3Al intermetallic inclusion growth process during direct laser deposition using Ni-based superalloy powder

    Materials Today: Proceedings

  3. Structural Transformations of Carbon Ferritic-Pearlitic Steels under Conditions of High-Speed Loading

    Obrabotka Metallov, Vol. 21, Núm. 3, pp. 115-128

  4. Structure and Properties of Austenitic Steel Surface-doped with NbC

    Materials Today: Proceedings

  5. Structure and Properties of Steel 40Kh2N2MA After Thermomechanical Treatment with Martensitic-Bainitic Transformation of Austenite

    Metal Science and Heat Treatment, Vol. 60, Núm. 9-10, pp. 666-673

2018

  1. Laser welding of heterogeneous materials in the titanium alloy VT-5 and aluminum alloy V-1461

    AIP Conference Proceedings

  2. Microstructure and Phase Composition of Ni-Based Alloy Obtained by High-Speed Direct Laser Deposition

    Journal of Materials Engineering and Performance, Vol. 27, Núm. 12, pp. 6398-6406

  3. Synchrotron Radiation in Analysis of Structural Transformations Under Friction Conditions of Carbon Steel

    Russian Physics Journal, Vol. 61, Núm. 3, pp. 503-508

2017

  1. Experimental verification of using nanostructured ceramic implants and osteograft

    AIP Conference Proceedings

  2. Features of heterophase structure formation at spark plasma sintering of high-carbon and chromium-nickel steels

    Materials Characterization, Vol. 129, pp. 252-259