Publicaciones en las que colabora con Andrés Tomás Aguayo Urquijo (51)

2015

  1. Kinetic Modeling of the Hydrotreating and Hydrocracking Stages for Upgrading Scrap Tires Pyrolysis Oil (STPO) toward High-Quality Fuels

    Energy and Fuels, Vol. 29, Núm. 11, pp. 7542-7553

2012

  1. Deactivating species deposited on Pt-Pd catalysts in the hydrocracking of light-cycle oil

    Energy and Fuels, Vol. 26, Núm. 3, pp. 1509-1519

  2. In deep characterization of coke deposited on Pt-Pd catalysts in the hydrocracking of LCO

    CHISA 2012 - 20th International Congress of Chemical and Process Engineering and PRES 2012 - 15th Conference PRES

  3. Inhibiting effect of water on the deactivation of the metallic function in the syngas to dimethyl ether process

    CHISA 2012 - 20th International Congress of Chemical and Process Engineering and PRES 2012 - 15th Conference PRES

2011

  1. Co-feeding water to attenuate deactivation of the catalyst metallic function (CuO-ZnO-Al2O3) by coke in the direct synthesis of dimethyl ether

    Applied Catalysis B: Environmental, Vol. 106, Núm. 1-2, pp. 167-173

  2. Influence of the support on the deactivation of bifunctional catalysts (Pt-Pd/support) in the hydrocracking of LCO

    Chemical Engineering Transactions

  3. Role of acidity in the deactivation and steady hydroconversion of light cycle oil on noble metal supported catalysts

    Energy and Fuels, Vol. 25, Núm. 8, pp. 3389-3399

2010

  1. Kinetic modelling for the deactivation of a CuO-ZnO-Al 2O 3/γ-Al 2O 3 bifunctional catalyst in the single-step DME synthesis

    19th International Congress of Chemical and Process Engineering, CHISA 2010 and 7th European Congress of Chemical Engineering, ECCE-7

  2. Regeneration of CuO-ZnO-Al2O3/γ-Al2O3 catalyst in the direct synthesis of dimethyl ether

    Applied Catalysis B: Environmental, Vol. 94, Núm. 1-2, pp. 108-116

2009

  1. Hydrocracking of light cycle oil (LCO) over Pt-Pd/acidic support catalysts

    8th World Congress of Chemical Engineering: Incorporating the 59th Canadian Chemical Engineering Conference and the 24th Interamerican Congress of Chemical Engineering

2008

  1. Effect of the operating conditions on the adsorption of water and methanol over γ-Al 2O 3

    CHISA 2008 - 18th International Congress of Chemical and Process Engineering

  2. The role of zeolite acidity in coupled toluene hydrogenation and ring opening in one and two steps

    Industrial and Engineering Chemistry Research, Vol. 47, Núm. 3, pp. 665-671

2007

  1. Effect of the support on the kinetic and deactivation performance of Pt/support catalysts during coupled hydrogenation and ring-opening of pyrolysis gasoline

    Applied Catalysis A: General, Vol. 333, Núm. 2, pp. 161-171

  2. Kinetic modeling of dimethyl ether synthesis in a single step on a CuO-ZnO-Al2O3/γ-Al2O3 catalyst

    Industrial and Engineering Chemistry Research, Vol. 46, Núm. 17, pp. 5522-5530

2006

  1. A study on the techniques for monitoring the reduction of bifunctional catalysts used in the single-step synthesis of dimethyl ether

    CHISA 2006 - 17th International Congress of Chemical and Process Engineering

  2. Development of new catalysts for methanol synthesis at low temperature

    CHISA 2006 - 17th International Congress of Chemical and Process Engineering

2005

  1. Direct synthesis of dimethyl ether from (H2+CO) and (H 2+CO2) feeds. Effect of feed composition

    International Journal of Chemical Reactor Engineering, Vol. 3

  2. Effect of operating conditions on the synthesis of dimethyl ether over a CuO-ZnO-Al2O3/NaHZSM-5 bifunctional catalyst

    Catalysis Today

  3. Petrolioaren ordezko erregaien lorpena sintesi-gasaren eta co2-aren bidez

    VIII Congreso Internacional de Ingeniería de Proyectos: Bilbao 6-8 de octubre de 2004. Actas

  4. Synthesis of dimethyl ether: A process for syngas and CO 2 transformation into a new clean fuel

    7th World Congress of Chemical Engineering, GLASGOW2005, incorporating the 5th European Congress of Chemical Engineering