Publicaciones en colaboración con investigadores/as de Universidad del País Vasco/Euskal Herriko Unibertsitatea (466)

2024

  1. Biomass Source Influence on Hydrogen Production through Pyrolysis and in Line Oxidative Steam Reforming

    ChemSusChem

  2. Biomass pyrolysis and in-line air–steam reforming as a potential strategy to progress towards sustainable ammonia production

    Energy Conversion and Management, Vol. 304

  3. Catalytic pyrolysis of date palm seeds on HZSM-5 and dolomite in a pyroprobe reactor in line with GC/MS

    Biomass Conversion and Biorefinery, Vol. 14, Núm. 2, pp. 2799-2818

  4. Effect of locating the atomizer at the inlet in fountain confined conical spouted beds for drying kaolin suspensions

    Drying Technology, Vol. 42, Núm. 3, pp. 450-461

  5. Energy Analysis and Heat Integration in the Joint Process of Biomass Fast Pyrolysis and In Line Sorption Enhanced Steam Reforming

    Energy and Fuels, Vol. 38, Núm. 15, pp. 14402-14413

  6. Functional variation of minimum spouting velocity with static bed height in conical spouted beds

    Chemical Engineering Research and Design, Vol. 208, pp. 204-208

  7. High-yield H2 production from HDPE through integrated pyrolysis and plasma-catalysis reforming process

    Chemical Engineering Journal, Vol. 479

  8. Impact of pyrolysis process conditions on the features of the biochar from Opuntia ficus indica fruit peels

    Biomass Conversion and Biorefinery

  9. Insight into the joint valorization of CO2 and waste plastics by pyrolysis and in line dry reforming for syngas production

    Fuel Processing Technology, Vol. 253

  10. Minimum spouting velocity of fine particles in fountain confined conical spouted beds using machine learning and least square fitting approaches

    Canadian Journal of Chemical Engineering

  11. Search for Operating Conditions in the Thermal Pistachio Splitting in Fountain Confined Conical Spouted Beds

    Food and Bioprocess Technology

  12. Selective H2 production from plastic waste through pyrolysis and in-line oxidative steam reforming

    Energy, Vol. 302

  13. Sensitive dependency of minimum spouting velocity on angle of repose of solid particles and cone angle in conical spouted beds

    Powder Technology, Vol. 436

  14. Spout geometry of fine particle conical spouted beds equipped with internal devices

    Powder Technology, Vol. 440

2023

  1. A comprehensive review of primary strategies for tar removal in biomass gasification

    Energy Conversion and Management, Vol. 276

  2. A novel alternative method for pistachio nuts splitting using conical spouted beds

    Chemical Engineering Science, Vol. 282

  3. Application of Green Polymeric Nanocomposites for Enhanced Oil Recovery by Spontaneous Imbibition from Carbonate Reservoirs

    Polymers, Vol. 15, Núm. 14

  4. Applying conventional and intelligent approaches to model the minimum spouting velocity of vegetable biomasses in conical spouted beds

    Powder Technology, Vol. 418

  5. Appraisal of agroforestry biomass wastes for hydrogen production by an integrated process of fast pyrolysis and in line steam reforming

    Journal of Environmental Management, Vol. 347

  6. Assessment of pine wood biomass wastes valorization by pyrolysis with focus on fast pyrolysis biochar production

    Journal of the Energy Institute, Vol. 108