Miren Josune Azkoiti Elustondo-rekin lankidetzan egindako argitalpenak (11)

2015

  1. Kinetic Modeling of the Hydrotreating and Hydrocracking Stages for Upgrading Scrap Tires Pyrolysis Oil (STPO) toward High-Quality Fuels

    Energy and Fuels, Vol. 29, Núm. 11, pp. 7542-7553

2014

  1. Causes of deactivation of bifunctional catalysts made up of CuO-ZnO-Al 2O3 and desilicated HZSM-5 zeolite in DME steam reforming

    Applied Catalysis A: General, Vol. 483, pp. 76-84

2012

  1. Effect of catalyst acidity on the catalytic cracking of glycerol under FCC conditions

    CHISA 2012 - 20th International Congress of Chemical and Process Engineering and PRES 2012 - 15th Conference PRES

2009

  1. HZSM-5 zeolite as catalyst additive for residue cracking under FCC conditions

    Energy and Fuels, Vol. 23, Núm. 9, pp. 4215-4223

2007

  1. Cracking of coker naphtha with gas-oil. Effect of HZSM-5 zeolite addition to the catalyst

    Energy and Fuels, Vol. 21, Núm. 1, pp. 11-18

  2. Effect of HZSM-5 catalyst addition on the cracking of polyolefin pyrolysis waxes under FCC conditions

    Chemical Engineering Journal, Vol. 132, Núm. 1-3, pp. 17-26

2006

  1. Influence of catalyst properties on the cracking of polyolefin pyrolysis waxes

    CHISA 2006 - 17th International Congress of Chemical and Process Engineering

  2. Yields and composition of products in the upgrading of heavy coker naphtha by catalytic cracking

    CHISA 2006 - 17th International Congress of Chemical and Process Engineering

2003

  1. Thermal recycling of polystyrene and polystyrene-butadiene dissolved in a light cycle oil

    Journal of Analytical and Applied Pyrolysis, Vol. 70, Núm. 2, pp. 747-760

1999

  1. Operation strategies for the regeneration section of catalytic cracking units

    Studies in Surface Science and Catalysis, Vol. 126, pp. 281-288

1997

  1. Transformation of Several Plastic Wastes into Fuels by Catalytic Cracking

    Industrial and Engineering Chemistry Research, Vol. 36, Núm. 11, pp. 4523-4529