Publicaciones (92) Publicaciones de Joseba Mendiguren Olaeta

2024

  1. AA5754 aluminium alloy springback reduction by post forming electro plastic effect (PFEPE)

    Mechanics of Materials, Vol. 198

  2. Characterization of friction coefficient at near solidus forming (NSF) conditions using T-shape compression test

    Journal of Manufacturing Processes, Vol. 124, pp. 1259-1272

  3. Necking detection in stretch-bent materials exhibiting the Portevin-Le Chatelier effect

    Materials Research Proceedings

  4. Sensitivity analysis of near solidus forming (NSF) process with digital twin using Taguchi approach

    Advances in Manufacturing

2023

  1. Anisotropic plasticity and fracture modelling of cold rolled AA5754

    Engineering Fracture Mechanics, Vol. 289

  2. Digital twin development for the sensitivity analysis of near solidus forming process

    Materials Research Proceedings

2022

  1. Anisotropic rate-dependent plasticity and fracture of AA5754

    Congress on Numerical Methods in Engineering CMN 2022 (2022. Las Palmas de Gran Canaria)

  2. Crystal Plasticity Modeling of Al Alloy under Linear and Non-Linear Loading

    Key Engineering Materials

  3. In-situ analysis of the elastic-plastic characteristics of high strength dual-phase steel

    Materials Science and Engineering A, Vol. 857

  4. Necking Predictions with Neural Networks in Metal Forming Operations

    Congress on Numerical Methods in Engineering CMN 2022 (2022. Las Palmas de Gran Canaria)

  5. Numerical study of advanced friction modelling for sheet metal forming: Influence of the die local roughness

    Tribology International, Vol. 165

  6. Plasticity evolution of an aluminum-magnesium alloy under abrupt strain path changes

    International Journal of Material Forming, Vol. 15, Núm. 3

  7. Post-forming, electro-plastic effect internal stress reduction in AA5754 aluminium alloy

    Materials Science and Engineering A, Vol. 852

  8. Thematic Session 04: Metal Forming – Formability Characterization,Damage and Ductile Fracture

    Congress on Numerical Methods in Engineering CMN 2022 (2022. Las Palmas de Gran Canaria)

2021

  1. A coupled 3D wear and fatigue numerical procedure: Application to fretting problems in ultra-high strength steel wires

    International Journal of Fatigue, Vol. 143

  2. Contact pressure and sliding velocity ranges in sheet metal forming simulations

    ESAFORM 2021 - 24th International Conference on Material Forming

  3. Contact pressure, sliding velocity and viscosity dependent friction behavior of lubricants used in tube hydroforming processes

    ESAFORM 2021 - 24th International Conference on Material Forming

  4. Initiation of dynamic recrystallization of as-cast N08028 alloy

    ESAFORM 2021 - 24th International Conference on Material Forming

  5. New drawbead tester and numerical analysis of drawbead closure force

    International Journal of Advanced Manufacturing Technology, Vol. 116, Núm. 5-6, pp. 1855-1869

  6. Simulation of Cold Forging Processes Using a Mixed Isotropic-Kinematik Hardening Model

    Minerals, Metals and Materials Series