Universidad Politécnica de Madrid-ko ikertzaileekin lankidetzan egindako argitalpenak (20)

2024

  1. Effect of the loading-rate and stress state on the constitutive modelling and fracture of 2205 Duplex stainless steel

    International Journal of Impact Engineering, Vol. 191

2020

  1. Crystal-plasticity-finite-element modeling of the quasi-static and dynamic response of a directionally solidified nickel-base superalloy

    Materials, Vol. 13, Núm. 13, pp. 1-15

2019

  1. Experimental determination of the dynamic fracture-initiation toughness of high-strength metals

    Engineering Fracture Mechanics, Vol. 205, pp. 498-510

2014

  1. A NOVEL METHOD FOR MEASURING THE DYNAMIC FRACTURE-INITIATION TOUGHNESS UNDER IMPULSIVE LOADINGS

    28TH INTERNATIONAL SYMPOSIUM ON BALLISTICS, VOLS 1 AND 2

  2. A coupled elastoplastic-damage constitutive model with Lode angle dependent failure criterion

    International Journal of Solids and Structures, Vol. 51, Núm. 1, pp. 93-110

  3. A novel method for measuring the dynamic fracture-initiation toughness under impulsive loadings

    Proceedings - 28th International Symposium on Ballistics, BALLISTICS 2014

  4. An experimental and numerical study of ductile failure under quasi-static and impact loadings of Inconel 718 nickel-base superalloy

    International Journal of Impact Engineering, Vol. 69, pp. 11-24

  5. On the loading-rate dependence of the Al 7017-T73 fracture-initiation toughness

    20TH EUROPEAN CONFERENCE ON FRACTURE

2012

  1. CAST-IN-PAIR BLADE RELEASE SIMULATION AND COMPARISON TO EXPERIMENTS WITH A FULL SCALE RIG

    PROCEEDINGS OF THE ASME TURBO EXPO 2012, VOL 7, PTS A AND B

  2. Cast-in-pair blade release simulation and comparison to experiments with a full scale RIG

    Proceedings of the ASME Turbo Expo

  3. Effect of the temperature, strain rate and microstructure on flow and fracture characteristics of Ti-45Al-2Nb-2Mn+0.8vol.% TiB 2 XD alloy

    European Physical Journal: Special Topics, Vol. 206, Núm. 1, pp. 3-14

  4. Flow and fracture behaviour of FV535 steel at different triaxialities, strain rates and temperatures

    Engineering Fracture Mechanics, Vol. 79, pp. 1-17

  5. Numerical simulation of tangling in jet engine turbines

    International Journal of Turbo and Jet Engines, Vol. 29, Núm. 4, pp. 269-282

2011

  1. A new plasticity and failure model for ballistic application

    International Journal of Impact Engineering, Vol. 38, Núm. 8-9, pp. 755-764

  2. AN EXPERIMENTAL AND NUMERICAL STUDY OF BALLISTIC IMPACTS ON A TURBINE CASING MATERIAL AT VARYING TEMPERATURES

    BALLISTICS 2011: 26TH INTERNATIONAL SYMPOSIUM ON BALLISTICS, VOL 1 AND VOL 2

  3. An experimental and numerical study of ballistic impacts on a turbine casing material at varying temperatures

    26th International Symposium on BALLISTICS

  4. An experimental and numerical study of ballistic impacts on a turbine casing material at varying temperatures

    Journal of Applied Mechanics, Transactions ASME, Vol. 78, Núm. 5

  5. BLAST RESPONSE ANALYSIS OF REINFORCED CONCRETE SLABS: EXPERIMENTAL PROCEDURE AND NUMERICAL SIMULATION

    BALLISTICS 2011: 26TH INTERNATIONAL SYMPOSIUM ON BALLISTICS, VOL 1 AND VOL 2

  6. Blast response analysis of reinforced concrete slabs: Experimental procedure and numerical simulation

    Journal of Applied Mechanics, Transactions ASME, Vol. 78, Núm. 5

2010

  1. Mechanical behavior of fv535 steel against ballistic impact at high temperatures

    25th International Symposium on Ballistics, ISB 2010