Jon
Aurrekoetxea Narbarte
Publicaciones (109) Publicaciones de Jon Aurrekoetxea Narbarte
2024
-
Definition of 3D Printing Parameters by the Design of Experiments to Characterise Carbon Fibre-Reinforced Polyamide
Proceedings of the 17th International Conference on Industrial Engineering and Industrial Management (ICIEIM) – XXVII Congreso de Ingeniería de Organización (CIO2023), pp. 1-6
-
Impact and notched strength of multiaxially reinforced out of die UV cured pultruded profiles
Polymer Composites, Vol. 45, Núm. 5, pp. 4348-4358
-
Impact behaviour of bio-inspired sandwich panels integrally manufactured from 3D printed continuous carbon fibre reinforced polyamide
Composites Science and Technology, Vol. 250
-
Low-velocity impact performance of integrally-3D printed continuous carbon fibre composite sandwich panels
Materials Letters, Vol. 354
2023
-
Design, manufacturing and testing of 3D printed variable-stiffness laminates for improved open-hole tensile behaviour
Additive Manufacturing, Vol. 63
-
Paneles fabricados mediante curado UV de prepregs fuera de autoclave reforzados con perfiles de pultrusión UV
Comunicaciones Congreso Nacional de Materiales Compuestos (MATCOMP21 y MATCOMP23). Sevilla, 21-23 Junio, 2022
-
Predicting the effect of voids generated during RTM on the low-velocity impact behaviour by machine learning-based surrogate models
Composites Part B: Engineering, Vol. 260
2022
-
Efecto de la separación fibra-matriz sobre las propiedades mecánicas de una viga forjada en poliamida reforzada con fibra de vidrio = Effect of the fiber-matrix separation on the mechanical properties of a fiberglass reinforced polyamide forged beam
Revista de Materiales Compuestos; Comunicaciones Matcomp21- Sostenibilidad y reciclaje - Fabricación, Vol. 7, Núm. 1, pp. 1-5
-
Effect of voids on the impact properties of Non-Crimp fabric carbon/epoxy laminates manufactured by liquid composite Moulding
Composite Structures, Vol. 297
-
Fibre–Wood Laminate Biocomposites: Seawater Immersion Effects on Flexural and Low Energy Impact Properties
Polymers, Vol. 14, Núm. 19
-
Impact performance of out of die UV cured pultruded profiles for vessel structures
ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability
-
Optimization of the CRTM process by means of monitoring techniques
Revista de Materiales Compuestos
2021
-
Generative design of 3D printed grippers for robot/human collaborative environments
2021 IEEE International Workshop of Electronics, Control, Measurement, Signals and their Application to Mechatronics, ECMSM 2021
-
Impregnation quality diagnosis in Resin Transfer Moulding by machine learning
Composites Part B: Engineering, Vol. 221
-
Quasi-static and dynamic crush behaviour of 3D printed thin-walled profiles reinforced with continuous carbon and glass fibres
Composites Part B: Engineering, Vol. 217
-
The effect of cross-section geometry on crushing behaviour of 3D printed continuous carbon fibre reinforced polyamide profiles
Composite Structures, Vol. 274
2020
-
An analytical model of through-thickness photopolymerisation of composites: Ultraviolet light transmission and curing kinetics
Composites Part B: Engineering, Vol. 191
-
Analysis of axial crushing behaviour of unsaturated polyester and vinyl ester composites manufactured by out of die ultraviolet cured pultrusion
ECCM 2018 - 18th European Conference on Composite Materials
-
Characterization of elastic and resistance behaviours of 3D printed continuous carbon fibre reinforced thermoplastics
ECCM 2018 - 18th European Conference on Composite Materials
-
Effect of alumina tri-hydrate filler on the mechanical and optical properties of flame-retardant ultraviolet cured vinyl ester composites
ECCM 2018 - 18th European Conference on Composite Materials