Publicaciones en las que colabora con José Antonio Sánchez Galíndez (39)

2018

  1. Experimental Measurement of Wire-lag Effect and Its Relation with Signal Classification on Wire EDM

    Procedia CIRP

  2. High-accuracy wire electrical discharge machining using artificial neural networks and optimization techniques

    Robotics and Computer-Integrated Manufacturing, Vol. 49, pp. 24-38

  3. Unexpected event prediction in wire electrical discharge machining using deep learning techniques

    Materials, Vol. 11, Núm. 7

2017

  1. Aeronautics advanced manufacturing center, the bet to surpass the valley of death between university and company

    Materials Science Forum

2016

  1. Experimental Study on Debris Evacuation during Slot EDMing

    Procedia CIRP

  2. On the Influence of Wire-lag on the WEDM of Low-radius Free-form Geometries

    Procedia CIRP

2015

  1. An Industrial System for Estimation of Workpiece Height in WEDM

    Procedia Engineering

2014

  1. Caracterización del proceso de descarga en electroerosión

    IMHE: Información de máquinas-herramienta, equipos y accesorios, Núm. 411, pp. 77-83

  2. Experimental study on micro EDM-drilling of Ti6Al4V using helical electrode

    Precision Engineering, Vol. 38, Núm. 4, pp. 821-827

  3. In-process prediction of the hardened layer in cylindrical traverse grind-hardening

    International Journal of Advanced Manufacturing Technology, Vol. 71, Núm. 1-4, pp. 101-108

  4. Modeling recast layer and surface finish in the manufacturing of high-aspect ratio micro-tools using the inverse slab electrical discharge milling process

    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 228, Núm. 4, pp. 553-562

2013

  1. Electrode set-up for EDM-drilling of large aspect-ratio microholes

    Procedia CIRP

  2. High-aspect ratio micro-pin manufacturing using inverse slab electrical discharge milling (ISEDM) process

    International Journal of Advanced Manufacturing Technology, Vol. 65, Núm. 9-12, pp. 1459-1469

  3. Influence of EDM parameters on slot machining in C1023 aeronautical alloy

    Procedia CIRP

  4. Reduction of oil and gas consumption in grinding technology using high pour-point lubricants

    Journal of Cleaner Production, Vol. 51, pp. 99-108

2012

  1. Analysis of micro-pin manufacturing using Inverse Slab Electrical Discharge Milling (ISEDM) process

    Key Engineering Materials

  2. Contact length estimation in grinding using thermocouple measurement and numerical simulation

    International Journal of Advanced Manufacturing Technology, Vol. 59, Núm. 1-4, pp. 83-91

  3. Industrial application of the MCG (minimum coolant grinding)technology

    Advanced Materials Research

  4. New technologies for increasing the capacities of WEDM machines

    Materials Science Forum

  5. Numerical prediction of heat affected layer in the EDM of aeronautical alloys

    Applied Surface Science, Vol. 259, pp. 780-790