Publicaciones en las que colabora con Borja Izquierdo Aramburu (40)

2024

  1. The Influence of the Gap Phenomenon on the Occurrence of Consecutive Discharges in WEDM Through High-Speed Video Camera Observation

    Applied Sciences (Switzerland), Vol. 14, Núm. 20

2021

  1. Characterization of vitrified alumina grinding wheel topography using 3D roughness parameters: influence of the crystalline structure of abrasive grains

    International Journal of Advanced Manufacturing Technology, Vol. 113, Núm. 5-6, pp. 1673-1684

  2. Study of Particle Size and Position on Debris Evacuation During Wire EDM Operations

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

2020

  1. Experimental and numerical study of crater volume in wire electrical discharge machining

    Materials, Vol. 13, Núm. 3

  2. Influence of aisi D2 workpiece roughness on heat partition and plasma channel radius in the wedm process

    Metals, Vol. 10, Núm. 10, pp. 1-13

  3. Observations on debris composition and size distribution in WEDM

    Procedia CIRP

2018

  1. An original tribometer to analyze the behavior of abrasive grains in the grinding process

    Metals, Vol. 8, Núm. 7

  2. Experimental Study on the Influence of Electrode Geometry and Electrode Path on Wear Pattern in EDM

    Procedia CIRP

  3. Improvement of EDM performance in high-aspect ratio slot machining using multi-holed electrodes

    Precision Engineering, Vol. 51, pp. 223-231

  4. Study of Interpolation Strategies to Dress Electrodes by Means of EDM

    Procedia CIRP

2017

  1. Echando chispas, tecnologías con futuro

    Metalindustria, Núm. 11, pp. 6-11

2016

  1. Experimental Study on Debris Evacuation during Slot EDMing

    Procedia CIRP

  2. Influence of the WEDM process on the fatigue behavior of Inconel® 718

    International Journal of Fatigue, Vol. 92, pp. 220-233

2014

  1. Caracterización del proceso de descarga en electroerosión

    IMHE: Información de máquinas-herramienta, equipos y accesorios, Núm. 411, pp. 77-83

  2. Experimental study on micro EDM-drilling of Ti6Al4V using helical electrode

    Precision Engineering, Vol. 38, Núm. 4, pp. 821-827

  3. In-process prediction of the hardened layer in cylindrical traverse grind-hardening

    International Journal of Advanced Manufacturing Technology, Vol. 71, Núm. 1-4, pp. 101-108

  4. Modeling recast layer and surface finish in the manufacturing of high-aspect ratio micro-tools using the inverse slab electrical discharge milling process

    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 228, Núm. 4, pp. 553-562

  5. Por un rectificado ecológico

    IMHE: Información de máquinas-herramienta, equipos y accesorios, Núm. 412, pp. 20-28

2013

  1. Electrode set-up for EDM-drilling of large aspect-ratio microholes

    Procedia CIRP

  2. High-aspect ratio micro-pin manufacturing using inverse slab electrical discharge milling (ISEDM) process

    International Journal of Advanced Manufacturing Technology, Vol. 65, Núm. 9-12, pp. 1459-1469