Eneko
Ukar Arrien
Publicaciones (122) Publicaciones de Eneko Ukar Arrien
2024
-
Enhancement of ceramic tool behaviour with textured grooves during machining of Inconel® 718
International Journal of Advanced Manufacturing Technology, Vol. 134, Núm. 5-6, pp. 2955-2968
2023
-
A Numerical Study on Phase Transformation and Hardness Evolution During Scanning Induction Hardening
Lecture Notes in Mechanical Engineering
-
ANALYSIS OF THE INCLINATION OF SLOTS IN TEXTURED CERAMIC TOOLS THROUGH THE STUDY OF THE FINAL ROUGHNESS AND CUTTING FORCES DURING CUTTING OF COLD WORK TOOL STEEL
MM Science Journal, Vol. 2023-November, pp. 6901-6908
-
Analysis of the influence of L-PBF porosity on the mechanical behavior of AlSi10Mg by XRCT-based FEM
Journal of Materials Research and Technology, Vol. 22, pp. 958-981
-
Estudio de la viabilidad del aporte de material en polvo 15CDV6 mediante aplicacion directa de energia laser (L-DED)
Revista DYNA, Vol. 98, Núm. 1, pp. 45-50
-
Fabrikazio gehigarriaren eta forjaren hibridazioa sektore aeronautikorako Inconel 718 piezen fabrikazio eraginkorrerako
Ekaia: Euskal Herriko Unibertsitateko zientzi eta teknologi aldizkaria, Núm. 44, pp. 353-370
-
Study of the flexural behaviour and bonding strength of WC-Co metal matrix composite coatings produced by Laser Directed Energy Deposition
Surface and Coatings Technology, Vol. 463
-
Wire arc additive manufacturing of nanomodified 2024 alloy
Materials Letters, Vol. 348
2022
-
A collaborative approach for the effective training of engineers in Metal Additive Manufacturing for the die and mould sector
Proceedings of the 2022 31st Annual Conference of the European Association for Education in Electrical and Information Engineering, EAEEIE 2022
-
Effect of Heat Treatment on the Microstructure and Hardness of Ni-Based Alloy 718 in a Variable Thickness Geometry Deposited by Powder fed Directed Energy Deposition
Metals, Vol. 12, Núm. 6
-
Impact of cutting fluid on hybrid manufacturing of AISI H13 tool steel
Rapid Prototyping Journal, Vol. 28, Núm. 5, pp. 933-944
-
Induction heating modeling for tempering of low alloy steels
27th IFHTSE Congress and European Conference on Heat Treatment 2022
-
Influence of deposition strategy and heat treatment on mechanical properties and microstructure of 2319 aluminium WAAM components
Materials and Design, Vol. 221
-
Influence of induction hardening residual stresses on rolling contact fatigue lifetime
International Journal of Fatigue, Vol. 159
-
Laser ablation and processing of polycrystalline cubic boron nitride cutting tool material
International Journal of Advanced Manufacturing Technology, Vol. 118, Núm. 3-4, pp. 785-800
-
Laser-testurizazio prozesurako eredu matematikoa
Ekaia: Euskal Herriko Unibertsitateko zientzi eta teknologi aldizkaria, Núm. 42, pp. 301-316
-
Monitoring of the L-PBF process to analyze the effect of powder bed temperature on parts roughness
Procedia CIRP
-
Normalized hardness prediction of L-DED metal matrix composite coatings for wear-resistant applications
Procedia CIRP
-
Numerical and experimental investigation of residual stresses during the induction hardening of 42CrMo4 steel
European Journal of Mechanics, A/Solids, Vol. 96
-
Numerical and experimental investigation on the residual stresses generated by scanning induction hardening
Procedia CIRP