Publicaciones en colaboración con investigadores/as de IK4-TEKNIKER (13)

2024

  1. Effect of Powder Reuse on Powder Characteristics and Properties of DED Laser Beam Metal Additive Manufacturing Process with Stellite® 21 and UNS S32750

    Metals, Vol. 14, Núm. 9

2020

  1. Geometrical control of DED processes based on 3D scanning applied to the manufacture of complex parts

    Procedia CIRP

2019

  1. Development of an intra-layer adaptive toolpath generation control procedure in the laser metal wire deposition process

    Materials, Vol. 12, Núm. 3

  2. Structured light-based height control for laser metal deposition

    Journal of Manufacturing Processes, Vol. 42, pp. 20-27

2018

  1. An automatic method for the self-referencing and operation of portable machines

    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 232, Núm. 14, pp. 2577-2591

  2. In-process height control during laser metal deposition based on structured light 3D scanning

    Procedia CIRP

2016

  1. Analysis, optimization and accuracy assessment of special-purpose portable machines by virtual techniques

    International Journal of Machine Tools and Manufacture, Vol. 111, pp. 31-42

  2. Concept design of high precision portable machines for the in-situ manufacturing of the ITER vacuum vessel

    Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016

2009

  1. Parameter optimization for mould and die recovering using laser cladding

    AIP Conference Proceedings

2008

  1. Mechanistic modelling of the micro end milling operation

    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 222, Núm. 1, pp. 23-33

2007

  1. Error budget and stiffness chain assessment in a micromilling machine equipped with tools less than 0.3 mm in diameter

    Precision Engineering, Vol. 31, Núm. 1, pp. 1-12

  2. Laser cladding with wire feeding method for die and mould maintenance

    Proceedings of the 15th International Symposium on Electromachining, ISEM 2007

  3. On the influence of cutting speed limitation on the accuracy of wire-EDM corner-cutting

    Journal of Materials Processing Technology, Vol. 182, Núm. 1-3, pp. 574-579