Publicaciones en colaboración con investigadores/as de Basque Research and Technology Alliance (15)

2024

  1. Effect of Powder Reuse on Powder Characteristics and Properties of DED Laser Beam Metal Additive Manufacturing Process with Stellite® 21 and UNS S32750

    Metals, Vol. 14, Núm. 9

2022

  1. CFD simulation for the modelling of the powder flow on continuous coaxial nozzles in the laser DED process

    Procedia CIRP

  2. Influence of Axial Depth of Cut and Tool Position on Surface Quality and Chatter Appearance in Locally Supported Thin Floor Milling

    Materials, Vol. 15, Núm. 3

  3. Modeling of cutting force and final thickness for low stiffness 2024-T3 aluminum alloy part milling considering its geometry and fixtures

    Journal of Materials Research and Technology, Vol. 21, pp. 2416-2427

2021

  1. Model for the prediction of deformations in the manufacture of thin-walled parts by wire arc additive manufacturing technology

    Metals, Vol. 11, Núm. 5

  2. Vibrations characterization in milling of low stiffness parts with a rubber-based vacuum fixture

    Chinese Journal of Aeronautics, Vol. 34, Núm. 6, pp. 54-66

  3. Wire arc additive manufacturing of an aeronautic fitting with different metal alloys: From the design to the part

    Journal of Manufacturing Processes, Vol. 64, pp. 188-197

2020

  1. Analysis of the wall geometry with different strategies for high deposition wire arc additive manufacturing of mild steel

    Metals, Vol. 10, Núm. 7, pp. 1-19

  2. Effects of gravity and non-perpendicularity during powder-fed directed energy deposition of ni-based alloy 718 through two types of coaxial nozzle

    Metals, Vol. 10, Núm. 5

  3. Geometrical model and strategy in single and multilayer structures deposited by powder-fed Directed Energy Deposition

    Procedia CIRP

  4. High deposition wire arc additive manufacturing of mild steel: Strategies and heat input effect on microstructure and mechanical properties

    Journal of Manufacturing Processes, Vol. 58, pp. 615-626

  5. Influence of elastomer layers in the quality of aluminum parts on finishing operations

    Metals, Vol. 10, Núm. 2

  6. Influence of heat input on the formation of laves phases and hot cracking in plasma arc welding (PAW) additive manufacturing of inconel 718

    Metals, Vol. 10, Núm. 6, pp. 1-17

  7. Residual stress and distortion modeling on aeronautical aluminum alloy parts for machining sequence optimization

    International Journal of Advanced Manufacturing Technology, Vol. 110, Núm. 5-6, pp. 1219-1232

  8. Strategy development for the manufacturing of multilayered structures of variable thickness of Ni-based alloy 718 by powder-fed directed energy deposition

    Metals, Vol. 10, Núm. 10, pp. 1-18