Publicaciones en colaboración con investigadores/as de Universidad del País Vasco/Euskal Herriko Unibertsitatea (361)

2024

  1. Adaptive edge finishing process on distorted features through robot-assisted computer vision

    Journal of Manufacturing Systems, Vol. 74, pp. 41-54

  2. Cutting model integrated digital twin–based process monitoring in small-batch machining

    International Journal of Advanced Manufacturing Technology

  3. Effect of V concentration in TiSiN monolayer coating on chip formation mechanism and chip sliding velocity during dry turning of Ti–6Al–4V alloy

    Journal of Materials Research and Technology, Vol. 32, pp. 4456-4464

  4. Effect of tool orientation on surface roughness and dimensional accuracy in ball end milling of thin-walled blades

    International Journal of Advanced Manufacturing Technology

  5. Exploring the effectiveness of negative and positive inserts in machining Inconel 718 alloy: a comparative study

    International Journal of Advanced Manufacturing Technology

  6. Fatigue Life Estimation Model of Repaired Components with the Expanded Stop-Hole Technique

    Metals, Vol. 14, Núm. 2

  7. Implementation of a scalable platform for real-time monitoring of machine tools

    Computers in Industry, Vol. 155

  8. In-Process Machining Distortion Prediction Method Based on Bulk Residual Stresses Estimation from Reduced Layer Removal

    Journal of Manufacturing and Materials Processing, Vol. 8, Núm. 1

  9. On the effect of radial engagement on the milling stability of modes perpendicular to the feed direction

    CIRP Journal of Manufacturing Science and Technology, Vol. 49, pp. 111-127

  10. Surface integrity analysis on selective removal by EDM of near-circular shapes from deterministic lattice structures fabricated by LPBF

    Procedia CIRP

  11. Topography simulation of free-form surface ball-end milling through partial discretization of linearised toolpaths

    Engineering Science and Technology, an International Journal, Vol. 55

2023

  1. ANALYSIS OF THE INCLINATION OF SLOTS IN TEXTURED CERAMIC TOOLS THROUGH THE STUDY OF THE FINAL ROUGHNESS AND CUTTING FORCES DURING CUTTING OF COLD WORK TOOL STEEL

    MM Science Journal, Vol. 2023-November, pp. 6901-6908

  2. ANALYSIS OF THIN-WALLED COMPONENTS WITH INTERNAL MICROSTRUCTURE DESIGN MANUFACTURED BY LPBF

    MM Science Journal, Vol. 2023-November, pp. 6860-6865

  3. An accuracy evolution method applied to five-axis machining of curved surfaces

    International Journal of Advanced Manufacturing Technology, Vol. 125, Núm. 7-8, pp. 3475-3487

  4. Assessing Industrial Communication Protocols to Bridge the Gap between Machine Tools and Software Monitoring

    Sensors, Vol. 23, Núm. 12

  5. Axial-compliant tools for adaptive chamfering of sharp-edges: Characterisation and modelling

    Engineering Science and Technology, an International Journal, Vol. 41

  6. Closed-loop chamfer measurement and control for automated robotic deburring processes

    European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 23rd International Conference and Exhibition, EUSPEN 2023

  7. Early detection of tool wear in electromechanical broaching machines by monitoring main stroke servomotors

    Mechanical Systems and Signal Processing, Vol. 204

  8. Edge finishing of large turbine casings using defined multi-edge and abrasive tools in automated cells

    International Journal of Advanced Manufacturing Technology, Vol. 124, Núm. 9, pp. 3149-3159

  9. Experimental Investigations of Using Aluminum Oxide (Al2O3) and Nano-Graphene Powder in the Electrical Discharge Machining of Titanium Alloy

    Micromachines, Vol. 14, Núm. 12