Publicaciones en colaboración con investigadores/as de Universidad del País Vasco/Euskal Herriko Unibertsitatea (49)

2024

  1. Integral recycling of epoxy based end-of-life fibre reinforced waste towards H2 rich gas generation

    Journal of Industrial and Engineering Chemistry, Vol. 129, pp. 665-681

  2. Valorisation of Sub-Products from Pyrolysis of Carbon Fibre-Reinforced Plastic Waste: Catalytic Recovery of Chemicals from Liquid and Gas Phases

    Polymers, Vol. 16, Núm. 5

2023

  1. Integral recycling of polyester based end-of-life fibre reinforced plastic waste towards syngas generation

    Sustainable Materials and Technologies, Vol. 38

2022

  1. Composite waste recycling: Predictive simulation of the pyrolysis vapours and gases upgrading process in Aspen plus

    Chemosphere, Vol. 300

2021

  1. Analysis of Information and Communication Technologies and flipped classroom methodology to motivate freshmen university students

    Online Science Education Journal, Vol. 6, Núm. 1, pp. 57-69

  2. Combustion of a solid recovered fuel (Srf) produced from the polymeric fraction of automotive shredder residue (asr)

    Polymers, Vol. 13, Núm. 21

  3. Conversion of Injected Forestry Waste Biomass Charcoal in a Blast Furnace: Influence of Pyrolysis Temperature

    Energy and Fuels, Vol. 35, Núm. 1, pp. 529-538

  4. DECHLORINATION of PLASTIC-RICH FRACTIONS REJECTED from WASTE ELECTRIC and ELECTRONIC EQUIPMENT RECYCLING PLANTS by MEANS of STEPWISE PYROLYSIS for VALORIZATION

    WIT Transactions on Ecology and the Environment, Vol. 254, pp. 81-90

  5. Impact of the addition of pyrolysed forestry waste to the coking process on the resulting green biocoke

    Metals, Vol. 11, Núm. 4

  6. Production of hydrogen-rich gases in the recycling process of residual carbon fiber reinforced polymers by pyrolysis

    Waste Management, Vol. 128, pp. 73-82

  7. Pyrolysis of Forestry Waste in a Screw Reactor with Four Sequential Heating Zones: Influence of Isothermal and Nonisothermal Profiles

    Industrial and Engineering Chemistry Research, Vol. 60, Núm. 51, pp. 18627-18639

  8. Secondary raw materials from residual carbon fiber-reinforced composites by an upgraded pyrolysis process

    Polymers, Vol. 13, Núm. 19

2020

  1. Análisis y resultados de la implementación de actividades interactivas en diferentes cursos de varios grados del área de Ingeniería

    Claves para la innovación pedagógica ante los nuevos retos: respuestas en la vanguardia de la práctica educativa

  2. Potentiality of “orujillo” (olive oil solid waste) to produce hydrogen by means of pyrolysis

    International Journal of Hydrogen Energy, Vol. 45, Núm. 40, pp. 20549-20557

  3. Reclamation of carbon fibers and added-value gases in a pyrolysis-based composites recycling process

    Journal of Cleaner Production, Vol. 273

  4. Use of a reforming catalyst for hydrogen production in the carbonization process of torrefied biomass

    Catalysts, Vol. 10, Núm. 11, pp. 1-14

2019

  1. Evaluation of HZSM-5 Zeolite as Cracking Catalyst for Upgrading the Vapours Generated in the Pyrolysis of an Epoxy-Carbon Fibre Waste Composite

    Topics in Catalysis, Vol. 62, Núm. 5-6, pp. 479-490

2018

  1. Optimization of charcoal production process from woody biomass waste: Effect of Ni-containing catalysts on pyrolysis vapors

    Catalysts, Vol. 8, Núm. 5

  2. Thermo-catalytic treatment of vapors in the recycling process of carbon fiber-poly (Benzoxazine) composite waste by pyrolysis

    Catalysts, Vol. 8, Núm. 11

2017

  1. From woody biomass waste to biocoke: influence of the proportion of different tree components

    European Journal of Wood and Wood Products, Vol. 75, Núm. 4, pp. 485-497