Universidad del País Vasco/Euskal Herriko Unibertsitatea-ko ikertzaileekin lankidetzan egindako argitalpenak (65)

2024

  1. An engineering approach to assess friction torque in generally loaded four-point contact slewing bearings

    Mechanism and Machine Theory, Vol. 192

  2. Confirming dark groove microstructural alterations as WEC initiation first stage in cylindrical roller thrust bearings lubricated with WEC critical oil

    Wear, Vol. 550-551

  3. Experimental Validation of Models for the Structural Simulation of Crossed Roller Wire-Race Bearing

    Mechanisms and Machine Science

  4. Methodology for the assessment of the friction torque of ball slewing bearings considering preload scatter

    Friction, Vol. 12, Núm. 8, pp. 1838-1857

  5. Undamped Dynamic Response Modelling of Four-Point Contact Slewing Bearings

    Mechanisms and Machine Science

2023

  1. A study on the three key concepts of White Etching Crack failure mode in its very early stages - Contrast with different testing methods

    Wear, Vol. 530-531

2022

  1. Early stages of subsurface crack and WEC formation in 100Cr6 bearing steel under RCF and hydrogen influence

    International Journal of Fatigue, Vol. 155

2021

  1. Broad review of “White Etching Crack” failure in wind turbine gearbox bearings: Main factors and experimental investigations

    International Journal of Fatigue, Vol. 145

  2. Efficient Finite Element modelling of crossed roller wire race slewing bearings

    Tribology International, Vol. 161

  3. Fatigue performance of prosthetic screws used in dental implant restorations: Rolled versus cut threads

    Journal of Prosthetic Dentistry, Vol. 126, Núm. 3, pp. 406.e1-406.e8

  4. Influence of the geometrical design on ball and crossed roller wire race bearing behavior under axial load

    Tribology International, Vol. 156

2020

  1. Achieving uniform thread load distribution in bolted joints using different pitch values

    Mechanics and Industry, Vol. 21, Núm. 6

  2. Structural modeling of crossed roller wire race bearings: Analytical submodel for the roller-wire-ring set

    Tribology International, Vol. 151

  3. Study of bolt load scatter due to tightening sequence

    International Journal of Pressure Vessels and Piping, Vol. 182

2019

  1. A methodology to evaluate the reliability impact of the replacement of welded components by additive manufacturing spare parts

    Metals, Vol. 9, Núm. 9

  2. An engineering approach for the estimation of slewing bearing stiffness in wind turbine generators

    Wind Energy, Vol. 22, Núm. 3, pp. 376-391

  3. Analytical Model for the Estimation of Axial Stiffness and Contact Results in Wire Race Ball Bearings

    Mechanisms and Machine Science (Springer Netherlands), pp. 3873-3882

  4. Design of an innovative fatigue test bench for dental implants

    Mechanisms and Machine Science (Springer Netherlands), pp. 103-111

  5. Generalization of the tetraparametric assembly method for the optimization of bolt tightening sequences in ring-type joints

    Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Vol. 233, Núm. 5, pp. 991-1000

  6. Inspection scheduling based on reliability updating of gas turbine welded structures

    Advances in Mechanical Engineering, Vol. 11, Núm. 1