Publicaciones en colaboración con investigadores/as de Islamic Azad University, Tehran (24)

2020

  1. A new procedure for the fabrication of dissimilar joints through injection of colloidal nanoparticles during friction stir processing: Proof concept for AA6062/PMMA joints

    Journal of Manufacturing Processes, Vol. 49, pp. 335-343

  2. A novel fed friction-stir (FFS) technology for nanocomposite joining

    Science and Technology of Welding and Joining, Vol. 25, Núm. 2, pp. 89-100

  3. Development of fed friction-stir (FFS) process for dissimilar nanocomposite welding between AA2024 aluminum alloy and polycarbonate (PC)

    Journal of Manufacturing Processes, Vol. 54, pp. 262-273

  4. Evaluation of a polymer-steel laminated sheet composite structure produced by friction stir additive manufacturing (FSAM) technology

    Polymer Testing, Vol. 90

  5. Fabrication of a nanostructured high strength steel tube by friction-forging tubular additive manufacturing (FFTAM) technology

    Journal of Manufacturing Processes, Vol. 58, pp. 724-735

  6. Friction stirwelding and friction spot stir welding processes of polymers-state of the art

    Materials, Vol. 13, Núm. 10

  7. Friction-forging tubular additive manufacturing (FFTAM): A new route of solid-state layer-upon-layer metal deposition

    Journal of Materials Research and Technology, Vol. 9, Núm. 6, pp. 15273-15285

  8. Modeling and experimental validation of material flow during FSW of polycarbonate

    Materials Today Communications, Vol. 22

  9. Monte Carlo simulation of grain refinement during friction stir processing

    Journal of Materials Science, Vol. 55, Núm. 27, pp. 13438-13456

  10. Processing and characterizations of polycarbonate/alumina nanocomposites by additive powder fed friction stir processing

    Thin-Walled Structures, Vol. 157

  11. Study on the effects of tool tile angle, offset and plunge depth on friction stir welding of poly(methyl methacrylate) T-joint

    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 234, Núm. 4, pp. 773-787

  12. Submerged friction stir welding of dissimilar joints between an Al-Mg alloy and low carbon steel: Thermo-mechanical modeling, microstructural features, and mechanical properties

    Journal of Manufacturing Processes, Vol. 50, pp. 68-79

2019

  1. An investigation on the dissimilar friction stir welding of T-joints between AA5754 aluminum alloy and poly(methyl methacrylate)

    Thin-Walled Structures, Vol. 135, pp. 376-384

  2. Friction stir welding of polycarbonate lap joints: Relationship between processing parameters and mechanical properties

    Polymer Testing, Vol. 79

  3. Intermetallic compounds (IMCs) formation during dissimilar friction-stir welding of AA5005 aluminum alloy to St-52 steel: numerical modeling and experimental study

    International Journal of Advanced Manufacturing Technology, Vol. 100, Núm. 9-12, pp. 2401-2422

  4. Underwater submerged dissimilar friction-stir welding of AA5083 aluminum alloy and A441 AISI steel

    International Journal of Advanced Manufacturing Technology, Vol. 102, Núm. 9-12, pp. 4383-4395

2018

  1. Effects of alumina nanoparticles on the microstructure, strength and wear resistance of poly(methyl methacrylate)-based nanocomposites prepared by friction stir processing

    Journal of the Mechanical Behavior of Biomedical Materials, Vol. 79, pp. 246-253

  2. Effects of processing parameters on the characteristics of dissimilar friction-stir-welded joints between AA5058 aluminum alloy and PMMA polymer

    Welding in the World, Vol. 62, Núm. 1, pp. 117-130

  3. Experimental and thermomechanical analysis of friction stir welding of poly(methyl methacrylate) sheets

    Science and Technology of Welding and Joining, Vol. 23, Núm. 3, pp. 209-218

  4. Experimental and thermomechanical analysis of the effect of tool pin profile on the friction stir welding of poly(methyl methacrylate) sheets

    Journal of Manufacturing Processes, Vol. 34, pp. 412-423