Publications in collaboration with researchers from Universidad de Deusto (24)

2024

  1. Analysis of oxidized hot working tool steel tribological behavior in tube piercing

    Materials Research Proceedings

  2. Analysis of super Cr13 stainless-steel internal fracture growth effects during skew mill piercing process

    Results in Engineering, Vol. 21

  3. Study on the influence of process parameters on the damage appearance during the push bench elongator process of super Cr13 tubes

    Materials Research Proceedings

2023

  1. Detailed study of tube hot rolling process by means of FEM

    Materials Research Proceedings

  2. Effects of skew rolling piercing process friction coefficient on tube twisting, strain rate and forming velocity

    Journal of Materials Research and Technology, Vol. 25, pp. 7254-7272

  3. Microstructural and Mechanical Analysis of Seamless Pipes Made of Superaustenitic Stainless Steel Using Cross-Roll Piercing and Elongation

    Journal of Manufacturing and Materials Processing, Vol. 7, Núm. 5

  4. Study of forming defects and failure occurrence in the radial-axial rolling of super duplex stainless steel rings

    Materials Research Proceedings

  5. The effect of temperature and strain rate on the mechanical properties and microstructure of super Cr13 martensitic stainless steel

    Journal of Materials Research and Technology, Vol. 24, pp. 3464-3476

2022

  1. Effects of Tool-Workpiece Friction Condition on Energy Consumption during Piercing Phase of Seamless Tube Production

    Key Engineering Materials

  2. Effects of tool–workpiece interfaces friction coefficient on power and energy consumption during the piercing phase of seamless tube production

    Journal of Materials Research and Technology, Vol. 19, pp. 3172-3188

  3. Evaluation of nanocomposite structure printed by solid-state additive manufacturing

    CIRP Journal of Manufacturing Science and Technology, Vol. 37, pp. 174-184

  4. Influence of rGO on the Crystallization Kinetics, Cytoxicity, and Electrical and Mechanical Properties of Poly (L-lactide-co-ε-caprolactone) Scaffolds

    Materials, Vol. 15, Núm. 21

  5. Internal crack formation in cross wedge rolling: Fundamentals and rolling methods

    Journal of Materials Processing Technology, Vol. 307

  6. Review on modeling and simulation of dynamic recrystallization of martensitic stainless steels during bulk hot deformation

    Journal of Materials Research and Technology, Vol. 18, pp. 2993-3025

2021

  1. Analysis of friction stir welding tool offset on the bonding and properties of al–mg–si alloy t-joints

    Materials, Vol. 14, Núm. 13

  2. Review on dynamic recrystallization of martensitic stainless steels during hot deformation: Part i—experimental study

    Metals, Vol. 11, Núm. 4

2020

  1. Analysis of wall thickness eccentricity in the rotary tube piercing process using a strain correlated FE model

    Metals, Vol. 10, Núm. 8, pp. 1-18

  2. Application of an incremental constitutive model for the FE analysis of material dynamic restoration in the rotary tube piercing process

    Materials, Vol. 13, Núm. 19

2019

  1. Life cycle assessment of a lithium iron phosphate (LFP) electric vehicle battery in second life application scenarios

    Sustainability (Switzerland), Vol. 11, Núm. 9

  2. Modelling of the cone-type rotary piercing process and analysis of the seamless tube longitudinal shear strain using industrial data

    AIP Conference Proceedings