Publicaciones en colaboración con investigadores/as de Universidad de Mondragón/Mondragon Unibertsitatea (27)

2021

  1. Integral Design and Manufacturing Methodology of a Reduced-Scale Servo Press

    IEEE/ASME Transactions on Mechatronics, Vol. 26, Núm. 5, pp. 2418-2428

2020

  1. Real-Time Servo Press Force Estimation Based on Dual Particle Filter

    IEEE Transactions on Industrial Electronics, Vol. 67, Núm. 5, pp. 4088-4097

  2. Soft sensing force measurement approach in sheet metal forming facilities

    IOP Conference Series: Materials Science and Engineering

2019

  1. Electromechanical properties of PVDF-based polymers reinforced with nanocarbonaceous fillers for pressure sensing applications

    Materials, Vol. 12, Núm. 21

  2. State-space analysis of mode-coupling workpiece chatter

    International Journal of Advanced Manufacturing Technology, Vol. 103, Núm. 5-8, pp. 2773-2781

2018

  1. Monitoring of critical assets

    The MANTIS Book: Cyber Physical System Based Proactive Collaborative Maintenance (River Publishers), pp. 93-144

2017

  1. Receptance based structural modification in a simple brake-clutch model for squeal noise suppression

    Mechanical Systems and Signal Processing, Vol. 90, pp. 222-233

2016

  1. A novel self-tuning method for Lamb wave inspection of plate-like structures

    8th European Workshop on Structural Health Monitoring, EWSHM 2016

  2. PWAS inspection in materials with different properties

    8th European Workshop on Structural Health Monitoring, EWSHM 2016

2014

  1. The modelling, simulation and experimental testing of the dynamic responses of an elevator system

    Mechanical Systems and Signal Processing, Vol. 42, Núm. 1-2, pp. 258-282

2013

  1. Relaxation modulus - Complex modulus interconversion for linear viscoelastic materials

    Mechanics of Time-Dependent Materials, Vol. 17, Núm. 3, pp. 465-479

2012

  1. A low modulus adhesive characterization by means of DMTA testing

    Journal of Adhesion

  2. De-icing of carbon composite plates by piezoelectric actuators

    ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials

  3. Dynamics of an exponentially damped solid rod: Analytic solution and finite element formulations

    International Journal of Solids and Structures, Vol. 49, Núm. 3-4, pp. 590-598

  4. The modelling and experimental testing of the vertical dynamic response of an elevator system with a 2:1 roping configuration

    International Conference on Noise and Vibration Engineering 2012, ISMA 2012, including USD 2012: International Conference on Uncertainty in Structure Dynamics

  5. The modelling and experimental testing of the vertical dynamic response of an elevator system with a 2:1 roping configuration

    PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2012) / INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2012)

2011

  1. A multi-harmonic approach to updating locally nonlinear structures

    Conference Proceedings of the Society for Experimental Mechanics Series

  2. Experimental characterization and modelization of the relaxation and complex moduli of a flexible adhesive

    Materials and Design, Vol. 32, Núm. 5, pp. 2783-2796

  3. Influence of nonviscous modes on transient response of lumped parameter systems with exponential damping

    Journal of Vibration and Acoustics, Transactions of the ASME, Vol. 133, Núm. 6

2008

  1. Non-deterministic robustness assessment of a structural dynamic lift model

    LSAME 2008 - Leuven Symposium on Applied Mechanics in Engineering, Conference Proceedings