Publicaciones en colaboración con investigadores/as de Universidad de Mondragón/Mondragon Unibertsitatea (37)

2023

  1. A tribological characterisation of Ti-48Al-2Cr-2Nb and Ti-6Al-4V alloys with dry, flood, and MQL lubricants

    CIRP Journal of Manufacturing Science and Technology, Vol. 41, pp. 501-523

  2. Digital Twin for Final Generated Surface Dimensional Error Analysis at Tool Path Level in Contour Milling

    Procedia CIRP

  3. Exploring the effectiveness of using internal CNC system signals for chatter detection in milling process

    Mechanical Systems and Signal Processing, Vol. 185

2022

  1. Roughness maps to determine the optimum process window parameters in face milling

    International Journal of Mechanical Sciences, Vol. 221

2021

  1. Measurement of plastic strain and plastic strain rate during orthogonal cutting for Ti-6Al-4V

    International Journal of Mechanical Sciences, Vol. 198

  2. Uncut chip geometry determination for cutting forces prediction in orthogonal turn-milling operations considering the tool profile and eccentricity

    International Journal of Mechanical Sciences, Vol. 198

  3. Use of the CEL method for estimating the minimum chip thickness when orthogonal cutting Ti6Al4V

    Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2021

2020

  1. Improvement of material databases for cutting force prediction in finishing conditions of A-356 aluminium alloy

    Procedia CIRP

  2. Mechanics of milling 48-2-2 gamma titanium aluminide

    CIRP Journal of Manufacturing Science and Technology, Vol. 30, pp. 131-139

  3. Surface drag analysis after Ti-6Al-4V orthogonal cutting using grid distortion

    Procedia CIRP

2019

  1. A mechanistic model to predict cutting force on orthogonal machining of Aluminum 7475-T7351 considering the edge radius

    Procedia CIRP

  2. Analytical modeling of the uncut chip geometry to predict cutting forces in orthogonal centric turn-milling operations

    International Journal of Machine Tools and Manufacture, Vol. 144

  3. Determination of emissivity and temperature of tool rake face when cutting AISI 4140

    Procedia Manufacturing

  4. FEM modeling of hard turning 42CrMoS4 steel

    Procedia CIRP

  5. Influence of chip segmentation of Ti64 on the topography of the machined surface

    AIP Conference Proceedings

  6. Microstructure based flow stress model to predict machinability in ferrite–pearlite steels

    CIRP Annals, Vol. 68, Núm. 1, pp. 49-52

2018

  1. An optimization methodology for material databases to improve cutting force predictions when milling martensitic stainless steel JETHETE-M152

    Procedia CIRP

  2. Determining tool/chip temperatures from thermography measurements in metal cutting

    Applied Thermal Engineering, Vol. 145, pp. 305-314

  3. Digital Interferometry Applied to Thermogravitational Technique

    Microgravity Science and Technology, Vol. 30, Núm. 5, pp. 635-641

  4. New calibration method to measure rake face temperature of the tool during dry orthogonal cutting using thermography

    Applied Thermal Engineering, Vol. 137, pp. 74-82