Publicaciones en las que colabora con Jon Andreu Larrañaga (25)

2023

  1. A 3D Reduced Common Mode Voltage PWM Algorithm for a Five-Phase Six-Leg Inverter

    Machines, Vol. 11, Núm. 5

  2. Haririk Gabeko Potentzia-Transferentzia: Potentzia Topologiaren eta MaiztasunarenAraberako Urpeko Galeren Analisia

    WWME 2022 IV. Jardunaldia - Berrikuntza eta irakaskuntza energia berriztagarrien aurrerapenetan

2022

  1. The role of power device technology in the electric vehicle powertrain

    International Journal of Energy Research, Vol. 46, Núm. 15, pp. 22222-22265

2020

  1. Wireless Power Transfer: Underwater loss analysis for different topologies and frequency values

    IECON Proceedings (Industrial Electronics Conference)

2014

  1. Optimal supercapacitors and batteries combination as an on-board energy storage system in railways

    PCIM Europe Conference Proceedings

2012

  1. A step forward towards the development of reliable matrix converters

    IEEE Transactions on Industrial Electronics, Vol. 59, Núm. 1, pp. 167-183

  2. Improvement of the design process of matrix converter platforms using the switching state matrix averaging simulation method

    IEEE Transactions on Industrial Electronics, Vol. 59, Núm. 1, pp. 220-234

2011

  1. "Droop" metodoak: potentzia-bihurgailuak paraleloan konektatzeko haririk gabeko medodoak

    Ekaia: Euskal Herriko Unibertsitateko zientzi eta teknologi aldizkaria, Núm. 24, pp. 257-276

  2. New fault tolerant matrix converter

    Electric Power Systems Research, Vol. 81, Núm. 2, pp. 538-552

2010

  1. Matrix converter fed small wind turbine farms: Optimization of the simulation process

    Proceedings of EPE-PEMC 2010 - 14th International Power Electronics and Motion Control Conference

2009

  1. Tapping wind turbines to HVDC lines

    2009 13th European Conference on Power Electronics and Applications, EPE '09

  2. Transmission alternatives for offshore electrical power

    Renewable and Sustainable Energy Reviews, Vol. 13, Núm. 5, pp. 1027-1038

2008

  1. Configurable-System-on-Programmable-Chip for power electronics control applications

    Proceedings - 2008 International Conference on Reconfigurable Computing and FPGAs, ReConFig 2008

  2. Matrix converter: Improvement on the start-up and the switching behavior

    Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC

  3. New protection circuit for high-speed switching and start-up of a practical matrix converter

    IEEE Transactions on Industrial Electronics, Vol. 55, Núm. 8, pp. 3100-3114

  4. Sequencing of supplies of the matrix converter: Improvement of the start-up and MC interaction with the filter and clamp circuit

    IET Conference Publications

2007

  1. Connection requirements for wind farms: A survey on technical requierements and regulation

    Renewable and Sustainable Energy Reviews, Vol. 11, Núm. 8, pp. 1858-1872

  2. Flexible and reduced modulation and simulation method for a Matrix Converter-DFIM modulator

    IECON Proceedings (Industrial Electronics Conference)

  3. Improvement of the matrix converter start-up process

    IECON Proceedings (Industrial Electronics Conference)

  4. Influence of a sensorless algorithm position estimation error on the control of a Doubly Fed Induction Machine

    IECON Proceedings (Industrial Electronics Conference)