Publicaciones (22) Publicaciones de Mehdi Naderi

2024

  1. C.P titanium/Ti–6Al–4V joint by spark plasma welding: Microstructure and mechanical properties

    Heliyon, Vol. 10, Núm. 6

  2. pH-Responsive Carboxylated Latexes: Switching between Stabilization and Destabilization

    Macromolecules, Vol. 57, Núm. 15, pp. 7052-7064

2023

  1. Spark plasma welding joining of copper- AISI4140 steel: Microstructures and mechanical properties

    Heliyon, Vol. 9, Núm. 11

  2. The effect of alumina-based sintering aid on the microstructure, selected mechanical properties, and coefficient of friction of Cf/SiC composite prepared via spark plasma sintering (SPS) method

    Ceramics International, Vol. 49, Núm. 10, pp. 15253-15265

  3. The effect of the amount and size of alumina sintering aid particles on some mechanical properties and microstructure of silicon carbide bulky pieces via spark plasma sintering

    International Journal of Materials Research, Vol. 114, Núm. 6, pp. 469-478

2021

  1. Fracture Surface and Mechanical Properties of Epoxy Composites

    Epoxy Composites: Fabrication, Characterization and Applications (wiley), pp. 259-298

  2. Investigation of density, phase, fracture toughness, thermal conductivity, and friction coefficient of Cf/SiC composite produced by the spark plasma sintering method

    Ceramics International, Vol. 47, Núm. 19, pp. 27553-27564

2020

  1. An investigation into resorcinol formaldehyde carbon aerogel/epoxy coatings: Exploring mechanical properties, ultraviolet stability, and corrosion resistance

    Polymer Composites, Vol. 41, Núm. 1, pp. 121-133

  2. Toward hardening of NiCrAlY alloy by spark plasma sintering of NiCrAlY-nanoSi3N4-graphite nanocomposite

    Journal of Alloys and Compounds, Vol. 847

2019

  1. A study on resorcinol formaldehyde carbon aerogel/epoxy nanocomposites: the effect of carbon aerogel pyrolysis time

    Journal of Polymer Research, Vol. 26, Núm. 3

  2. Development of biocompatibility in the orthodontic brackets based on MgAl2O4/ Si3N4 nanocomposites

    Composites Part B: Engineering, Vol. 173

  3. Reinforcing effect of amine-functionalized and carboxylated porous graphene on toughness, thermal stability, and electrical conductivity of epoxy-based nanocomposites

    Journal of Applied Polymer Science, Vol. 136, Núm. 19

2018

  1. Investigation of the mechanical, thermal, and anticorrosion properties of epoxy nanocomposite coatings: Effect of synthetic hardener and nanoporous graphene

    Journal of Applied Polymer Science, Vol. 135, Núm. 17

2017

  1. A study of rigid polyurethane foams: The effect of synthesized polyols and nanoporous graphene

    Journal of Applied Polymer Science, Vol. 134, Núm. 26

  2. Effect of nanostructured grains on martensite formation during plasma nitriding of AISI 321 austenitic stainless steel

    Surface and Coatings Technology, Vol. 310, pp. 231-238

2016

  1. Effect of sintering temperature on microstructural and optical properties of transparent yttria ceramics fabricated by spark plasma sintering

    Ceramics International, Vol. 42, Núm. 6, pp. 7819-7823

  2. Evaluation of nitrogen diffusion in thermo-mechanically nanostructured and plasma nitrided stainless steel

    Surface and Coatings Technology, Vol. 296, pp. 40-45

  3. Synthesis and characterization of Y2O3 nanoparticles by sol–gel process for transparent ceramics applications

    Journal of Sol-Gel Science and Technology, Vol. 78, Núm. 3, pp. 682-691

  4. Synthesis of yttria nanopowders by two precipitation methods and investigation of synthesis conditions

    International Journal of Applied Ceramic Technology, Vol. 13, Núm. 1, pp. 209-218

2010

  1. Deformation homogeneity in accumulative back extrusion processing of AZ31 magnesium alloy

    Journal of Alloys and Compounds, Vol. 507, Núm. 1, pp. 207-214