Publications in collaboration with researchers from Novosibirsk State Technical University (34)

2024

  1. The effect of laser surfacing modes on the geometrical characteristics of the single laser tracks

    Obrabotka Metallov, Vol. 26, Núm. 2, pp. 57-70

2022

  1. Effect of Modes of Spark Plasma Sintering on the Structure and Properties of Materials of the Ni – Cr – Si – B – C System

    Metal Science and Heat Treatment, Vol. 63, Núm. 11-12, pp. 637-643

  2. Phase composition and fatigue crack growth behavior of Inconel 718 under additive manufacturing

    Materials Science and Engineering A, Vol. 851

  3. Use of Non-Vacuum Electron Beam Cladding for Creating a Combined Joint of High-Carbon and Chromium-Nickel Steels

    Metal Science and Heat Treatment, Vol. 63, Núm. 11-12, pp. 644-649

2021

  1. Characterization of Ni-Cr-Mo alloy phase structures under DLD process

    Journal of Physics: Conference Series

  2. Effect of Heat Treatment on the Structure, Phase Composition and Impact Toughness of Inconel 718 Alloy Under Additive Manufacturing

    Photonics Russia, Vol. 15, Núm. 7, pp. 568-575

2020

  1. Analysis of laser direct stainless steel powder deposition on Ti6Al4V substrate

    Materials Letters, Vol. 274

  2. Gradient microstructure, mechanical properties and phase composition of Ni-Cr-Fe alloy under additive manufacturing process

    AIP Conference Proceedings

  3. Microstructural Features of Welded Railway Frogs formed by Flash Butt Welding and Pulse-Arc Cladding

    Obrabotka Metallov, Vol. 22, Núm. 2, pp. 53-62

  4. The Phase Composition of the Nickel-based Inconel 718 Alloy obtained by Additive Technology

    Obrabotka Metallov, Vol. 22, Núm. 3, pp. 69-81

2019

  1. Formation of Transition Zones Under Spark Plasma Sintering of Dissimilar Steels

    Metal Science and Heat Treatment, Vol. 60, Núm. 9-10, pp. 680-685

  2. Simulation of the Ni3Al intermetallic inclusion growth process during direct laser deposition using Ni-based superalloy powder

    Materials Today: Proceedings

  3. Structural Transformations of Carbon Ferritic-Pearlitic Steels under Conditions of High-Speed Loading

    Obrabotka Metallov, Vol. 21, Núm. 3, pp. 115-128

  4. Structure and Properties of Austenitic Steel Surface-doped with NbC

    Materials Today: Proceedings

  5. Structure and Properties of Steel 40Kh2N2MA After Thermomechanical Treatment with Martensitic-Bainitic Transformation of Austenite

    Metal Science and Heat Treatment, Vol. 60, Núm. 9-10, pp. 666-673

2018

  1. Laser welding of heterogeneous materials in the titanium alloy VT-5 and aluminum alloy V-1461

    AIP Conference Proceedings

  2. Microstructure and Phase Composition of Ni-Based Alloy Obtained by High-Speed Direct Laser Deposition

    Journal of Materials Engineering and Performance, Vol. 27, Núm. 12, pp. 6398-6406

  3. Synchrotron Radiation in Analysis of Structural Transformations Under Friction Conditions of Carbon Steel

    Russian Physics Journal, Vol. 61, Núm. 3, pp. 503-508

2017

  1. Experimental verification of using nanostructured ceramic implants and osteograft

    AIP Conference Proceedings

  2. Features of heterophase structure formation at spark plasma sintering of high-carbon and chromium-nickel steels

    Materials Characterization, Vol. 129, pp. 252-259