2024

1. A global methanol-to-hydrocarbons (MTH) model with H-ZSM-5 catalyst acidity descriptors

   Fuel, Vol. 378

2. Are Rh Catalysts a Suitable Choice for Bio-Oil Reforming? The Case of a Commercial Rh Catalyst in the Combined H2O and CO2 Reforming of Bio-Oil

   Catalysts, Vol. 14, Núm. 9

3. Biomass pyrolysis and in-line air–steam reforming as a potential strategy to progress towards sustainable ammonia production

   Energy Conversion and Management, Vol. 304

4. Catalytic pyrolysis of date palm seeds on HZSM-5 and dolomite in a pyroprobe reactor in line with GC/MS

   Biomass Conversion and Biorefinery, Vol. 14, Núm. 2, pp. 2799-2818

5. Circular economy strategy for the valorization of fly ash as a substitute for cement in monoliths (resistance and reactivity evaluation)

   Environmental Progress and Sustainable Energy, Vol. 43, Núm. 3

6. Dual-cycle-based lumped kinetic model for methanol-to-aromatics (MTA) reaction over H-ZSM-5 zeolites of different Si/Al ratio

   Fuel, Vol. 361

7. Effect of locating the atomizer at the inlet in fountain confined conical spouted beds for drying kaolin suspensions

   Drying Technology, Vol. 42, Núm. 3, pp. 450-461

8. Energy Analysis and Heat Integration in the Joint Process of Biomass Fast Pyrolysis and In Line Sorption Enhanced Steam Reforming

   Energy and Fuels, Vol. 38, Núm. 15, pp. 14402-14413

9. Functional variation of minimum spouting velocity with static bed height in conical spouted beds

   Chemical Engineering Research and Design, Vol. 208, pp. 204-208

10. Gasoline production by oligomerization of 1-butene at low pressure: Kinetic model and reactor simulation

    Energy Conversion and Management, Vol. 314

11. Global Vision of the Reaction and Deactivation Routes in the Ethanol Steam Reforming on a Catalyst Derived from a Ni-Al Spinel

    Energy and Fuels, Vol. 38, Núm. 8, pp. 7033-7048

12. High Q Ultra-Low Threshold Lasing in Conjugated Polymer Blend Microspheres Promoted by FRET

    Advanced Optical Materials, Vol. 12, Núm. 18

13. High-yield H2 production from HDPE through integrated pyrolysis and plasma-catalysis reforming process

    Chemical Engineering Journal, Vol. 479

14. Hydrocracking of Plastic Pyrolysis Oil (PPO) Blended with Vacuum Gas Oil (VGO) over Pt-Pd Catalysts Supported on USY-ASA-Al2O3 Composites

    Energy and Fuels, Vol. 38, Núm. 18, pp. 17866-17877

15. Hydrocracking of a HDPE/VGO Blend: Influence of Catalyst-to-Feed Ratio on Fuel Yield and Composition

    Catalysts, Vol. 14, Núm. 3

16. Impact of pyrolysis process conditions on the features of the biochar from Opuntia ficus indica fruit peels

    Biomass Conversion and Biorefinery

17. Improving process sustainability in bio-oil transforming for biofuels and platform chemicals production: Valorization of the carbon residue

    Fuel, Vol. 364

18. Improving the dehydrogenation function and stability of Zn-modified ZSM-5 catalyst in methanol-to-aromatics reaction by Ca addition

    Applied Catalysis A: General, Vol. 683

19. Insight into the joint valorization of CO2 and waste plastics by pyrolysis and in line dry reforming for syngas production

    Fuel Processing Technology, Vol. 253

20. Jet-spouted bed in conical contactor for winery waste drying

    Powder Technology, Vol. 436