Publicaciones en colaboración con investigadores/as de IK4-TEKNIKER (10)

2024

  1. Comparative analysis of Direct Energy Deposition parameters for Ti-6Al-4V using laser beam and coaxial wire (DED-LB/CW)

    Procedia CIRP

  2. Confirming dark groove microstructural alterations as WEC initiation first stage in cylindrical roller thrust bearings lubricated with WEC critical oil

    Wear, Vol. 550-551

2023

  1. A study on the three key concepts of White Etching Crack failure mode in its very early stages - Contrast with different testing methods

    Wear, Vol. 530-531

2022

  1. Early stages of subsurface crack and WEC formation in 100Cr6 bearing steel under RCF and hydrogen influence

    International Journal of Fatigue, Vol. 155

2021

  1. Broad review of “White Etching Crack” failure in wind turbine gearbox bearings: Main factors and experimental investigations

    International Journal of Fatigue, Vol. 145

2019

  1. Compositional Modification of Tool Steel to Improve Its Wear Resistance

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 50, Núm. 8, pp. 3912-3921

2018

  1. Retained austenite control for the soft machining of high-hardness tool steels

    Metals, Vol. 8, Núm. 7

2017

  1. Effect of misalignments on the tribological performance of elastomeric rod lip seals: Study methodology and case study

    Tribology International, Vol. 116, pp. 9-18

2007

  1. Error budget and stiffness chain assessment in a micromilling machine equipped with tools less than 0.3 mm in diameter

    Precision Engineering, Vol. 31, Núm. 1, pp. 1-12

2006

  1. Tool wear in micro-milling: Experimental comparison of coatings

    Proceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006