Tecnalia-ko ikertzaileekin lankidetzan egindako argitalpenak (18)

2021

  1. Frequency domain modelling of a coupled system of floating structure and mooring Lines: An application to a wave energy converter

    Ocean Engineering, Vol. 220

2020

  1. Small scale experimental validation of a numerical model of the HarshLab2.0 floating platform coupled with a non-linear lumped mass catenary mooring system

    Ocean Engineering, Vol. 200

2018

  1. Mooring system design approach, a case study for MARMOK-A floating OWC wave energy converter

    Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE

2015

  1. Preventing chatter vibrations in heavy-duty turning operations in large horizontal lathes

    Journal of Sound and Vibration, Vol. 340, pp. 317-330

2011

  1. An integrated processmachine approach for designing productive and lightweight milling machines

    International Journal of Machine Tools and Manufacture, Vol. 51, Núm. 7-8, pp. 591-604

  2. Light machine tools for productive machining

    Nova Science Publishers, Inc., pp. 1-53

  3. Light machine tools for productive machining

    Machine Tools: Design, Reliability and Safety (Nova Science Publishers, Inc.), pp. 81-116

2010

  1. Eco-efficient and highly productive machine tools by means of an holistic eco-design approach

    Proceedings of APMS 2010 - International Conference on Advances in Production Management Systems

2009

  1. Design and test of a multitooth tool for CFRP milling

    Journal of Composite Materials, Vol. 43, Núm. 26, pp. 3275-3290

  2. Motion pattern analysis of parallel kinematic machines: A case study

    Robotics and Computer-Integrated Manufacturing, Vol. 25, Núm. 2, pp. 432-440

  3. New concepts for structural components

    Machine Tools for High Performance Machining (Springer London), pp. 47-73

  4. Parallel kinematics for machine tools

    Machine Tools for High Performance Machining (Springer London), pp. 335-368

2008

  1. Prediction of press/die deformation for an accurate manufacturing of drawing dies

    International Journal of Advanced Manufacturing Technology, Vol. 37, Núm. 7-8, pp. 649-656

  2. Toolpath dependent stability lobes for the milling of thin-walled parts

    International Journal of Machining and Machinability of Materials, Vol. 4, Núm. 4, pp. 377-392

2006

  1. Avoiding instability on the milling of parts with thin features

    Materials Science Forum

  2. Machining of Large Dies Based on the Prediction of the Press/Die Deformation

    Intelligent Production Machines and Systems - 2nd I*PROMS Virtual International Conference 3-14 July 2006 (Elsevier Ltd), pp. 83-88

2005

  1. Determination of cutting conditions for the stable milling of flexible parts by means of a three-dimensional dynamic model

    American Society of Mechanical Engineers, Manufacturing Engineering Division, MED

  2. The milling of airframe components with low rigidity: A general approach to avoid static and dynamic problems

    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 219, Núm. 11, pp. 789-801