Publicaciones en las que colabora con Pedro Ibáñez Ereño (21)

2014

  1. Aplicación del aprendizaje basado en proyectos a los Sistemas Electrónicos Digitales

    Unibertsitate graduak : berrikuntzarako aukerak eta bideak: = Los grados universitarios : posibilidades y caminos de innovación (Universidad del País Vasco = Euskal Herriko Unibertsitatea), pp. 155-180

2012

  1. Improvement of the design process of matrix converter platforms using the switching state matrix averaging simulation method

    IEEE Transactions on Industrial Electronics, Vol. 59, Núm. 1, pp. 220-234

2011

  1. Frequency-adaptive stationary-reference-frame grid voltage sequence detector for distributed generation systems

    IEEE Transactions on Industrial Electronics, Vol. 58, Núm. 9, pp. 4275-4287

  2. New fault tolerant matrix converter

    Electric Power Systems Research, Vol. 81, Núm. 2, pp. 538-552

2010

  1. Diseño de un convertidor matricial con control integrado

    Revista DYNA, Vol. 85, Núm. 3, pp. 217-224

  2. Variable-frequency grid-sequence detector based on a quasi-ideal low-pass filter stage and a phase-locked loop

    IEEE Transactions on Power Electronics, Vol. 25, Núm. 10, pp. 2552-2563

2009

  1. Tapping wind turbines to HVDC lines

    2009 13th European Conference on Power Electronics and Applications, EPE '09

  2. Transmission alternatives for offshore electrical power

    Renewable and Sustainable Energy Reviews, Vol. 13, Núm. 5, pp. 1027-1038

2008

  1. Efficient modulation technique for a four-leg fault-tolerant neutral-point-clamped inverter

    IEEE Transactions on Industrial Electronics, Vol. 55, Núm. 3, pp. 1067-1074

  2. FPGA solution for matrix converter double sided space vector modulation algorithm

    International Journal of Electronics, Vol. 95, Núm. 11, pp. 1181-1200

  3. Permanent-magnet wind turbines control tuning and torque estimation improvements

    Proceedings of the 15th IEEE International Conference on Electronics, Circuits and Systems, ICECS 2008

2007

  1. Connection requirements for wind farms: A survey on technical requierements and regulation

    Renewable and Sustainable Energy Reviews, Vol. 11, Núm. 8, pp. 1858-1872

  2. Fault-tolerant hybrid four-leg multilevel converter

    2007 European Conference on Power Electronics and Applications, EPE

  3. Flexible and reduced modulation and simulation method for a Matrix Converter-DFIM modulator

    IECON Proceedings (Industrial Electronics Conference)

2004

  1. Intelligent PV Module for grid-connected PV systems

    IECON Proceedings (Industrial Electronics Conference)

  2. Novel power error vector control for Wind Turbine with doubly fed induction generator

    IECON Proceedings (Industrial Electronics Conference)

2003

  1. Vector Control and Direct Power Control Performance in Doubly Fed Induction Generator For Variable-Speed Wind Turbine

    EWEC 2003: European Wind Energy Conference

2000

  1. DSP-based board for control of jaw crushers used in mining and quarrying industry

    IECON Proceedings (Industrial Electronics Conference)

1999

  1. Image processing system for PC through the enhanced parallel port

    IEEE International Symposium on Industrial Electronics

1994

  1. Parallel raster image processor for PCB manufacturing

    IECON Proceedings (Industrial Electronics Conference)