Publicaciones en las que colabora con José Gerardo Vieira Rocha (68)

2018

  1. Design and fabrication of multilayer inkjet-printed passive components for printed electronics circuit development

    Journal of Manufacturing Processes, Vol. 31, pp. 364-371

2017

  1. Fabrication and characterization of high-performance polymer-based magnetoelectric DC magnetic field sensors devices

    IEEE Transactions on Industrial Electronics, Vol. 64, Núm. 6, pp. 4928-4934

2016

  1. All-inkjet-printed low-pass filters with adjustable cutoff frequency consisting of resistors, inductors and transistors for sensor applications

    Organic Electronics, Vol. 38, pp. 205-212

  2. Characterization of Metglas/poly(vinylidene fluoride)/Metglas magnetoelectric laminates for AC/DC magnetic sensor applications

    Materials and Design, Vol. 92, pp. 906-910

  3. Design and validation of a biomechanical bioreactor for cartilage tissue culture

    Biomechanics and Modeling in Mechanobiology, Vol. 15, Núm. 2, pp. 471-478

  4. Electronic optimization for an energy harvesting system based on magnetoelectric Metglas/poly(vinylidene fluoride)/Metglas composites

    Smart Materials and Structures, Vol. 25, Núm. 8

  5. Increasing X-ray to visible transduction performance of Gd2O3:Eu3+PVDF composites by PPO/POPOP addition

    Composites Part B: Engineering, Vol. 91, pp. 610-614

2015

  1. Degradation of all-inkjet-printed organic thin-film transistors with TIPS-pentacene under processes applied in textile manufacturing

    Organic Electronics, Vol. 22, pp. 12-19

  2. Energy harvesting performance of BaTiO3/poly(vinylidene fluoride-trifluoroethylene) spin coated nanocomposites

    Composites Part B: Engineering, Vol. 72, pp. 130-136

  3. Gd2O3:Eu Nanoparticle-Based Poly(vinylidene fluoride) Composites for Indirect X-ray Detection

    Journal of Electronic Materials, Vol. 44, Núm. 1, pp. 129-135

  4. Gd2O3:Eu3+/PPO/POPOP/PS composites for digital imaging radiation detectors

    Applied Physics A: Materials Science and Processing, Vol. 121, Núm. 2, pp. 581-587

2014

  1. All-inkjet-printed bottom-gate thin-film transistors using UV curable dielectric for well-defined source-drain electrodes

    Journal of Electronic Materials, Vol. 43, Núm. 7, pp. 2631-2636

  2. Piezoelectric coaxial filaments produced by coextrusion of poly(vinylidene fluoride) and electrically conductive inner and outer layers

    Journal of Applied Polymer Science, Vol. 131, Núm. 17, pp. 8749-8760

2013

  1. Development of inkjet printed strain sensors

    Smart Materials and Structures, Vol. 22, Núm. 10

  2. Energy harvesting performance of piezoelectric electrospun polymer fibers and polymer/ceramic composites

    Sensors and Actuators, A: Physical, Vol. 196, pp. 55-62

  3. Evaluation of the main processing parameters influencing the performance of poly(vinylidene fluoride-trifluoroethylene) lithium-ion battery separators

    Journal of Solid State Electrochemistry, Vol. 17, Núm. 3, pp. 861-870

  4. Piezoresistive sensors for force mapping of hip-prostheses

    Sensors and Actuators, A: Physical, Vol. 195, pp. 133-138

  5. Polypropylene-carbon nanofiber composites as strain-gauge sensor

    IEEE Sensors Journal, Vol. 13, Núm. 7, pp. 2603-2609

2012

  1. Bi 2Te 3-Sb 2Te 3 on polymeric substrate for X-ray detectors based on the seebeck effect

    Microsystem Technologies, Vol. 18, Núm. 1, pp. 1-8

  2. Effect of degree of porosity on the properties of poly(vinylidene fluoride-trifluorethylene) for Li-ion battery separators

    Journal of Membrane Science, Vol. 407-408, pp. 193-201