Damping characterisation of an elevator rope

  1. Iriondo, Jaione 1
  2. McCloskey, Alex 1
  3. Irazu, Leire 1
  4. Galfarsoro, Unai 1
  5. Mendizabal, Mikel 1
  1. 1 Universidad de Mondragón/Mondragon Unibertsitatea
    info

    Universidad de Mondragón/Mondragon Unibertsitatea

    Mondragón, España

    ROR https://ror.org/00wvqgd19

Actas:
International Conference on Noise and Vibration Engineering (ISMA 22)

Editorial: ISMA

ISBN: 978-90-828931-5-1

Año de publicación: 2022

Páginas: 3471-3482

Tipo: Aportación congreso

Resumen

The ropes of an elevator transmit the vibrations from the motor to the elevator car, and consequently have a great influence on comfort. Therefore, it is of major interest to analyse the dynamic behaviour of these elements. In the present work, the characterisation of the damping of an elevator rope was carried out. Three type of damping estimation methods were analysed. First, the Half Power Bandwidth (HPB) method was used. In addition, due to the low signal quality obtained in some results, the logarithmic decrement method was employed. Finally, experimental Modal Analysis (EMA) algorithms were carried out. According to the results, similar damping values were obtained with the three methods. Thus, it is confirmed that the HPBmethod is the most interesting procedure. On the one hand, it is not necessary a previous signal conditioning that requires the definition of the filtering conditions by the analyst. On the other hand, instead of measuring the acceleration response of several points, only one acceleration response signal is enough