High-Frequency Modelling of Electrical Machines for EMC Analysis

  1. Moreno, Yerai 2
  2. Egea, Aritz 2
  3. Almandoz, Gaizka 2
  4. Ugalde, Gaizka 2
  5. Urdangarin, Ander 1
  6. Moreno, Roberto 3
  1. 1 ORONA Elevator Innovation Centre, 20120 Hernani, Spain
  2. 2 Faculty of Engineering, Mondragon Unibertsitatea, 20500 Mondragón, Spain
  3. 3 IKERLAN, 20500 Mondragón, Spain
Revista:
Electronics

ISSN: 2079-9292

Año de publicación: 2024

Volumen: 13

Número: 4

Páginas: 787

Tipo: Artículo

DOI: 10.3390/ELECTRONICS13040787 GOOGLE SCHOLAR lock_openAcceso abierto editor

Otras publicaciones en: Electronics

Objetivos de desarrollo sostenible

Resumen

The trend towards electrification in mobility has led to the increased use of silicon carbide (SiC) semiconductors. These semiconductors are more efficient but also present challenges related to electromagnetic interference (EMI) due to their higher voltage derivatives. This paper introduces a new high-frequency impedance model for electrical machines. The proposed model distinguishes itself from existing approaches by being entirely derived from Finite Element Method (FEM) simulations, which include capacitances in the magnetic simulation. This approach achieves a balance between computational efficiency and high accuracy across the entire frequency spectrum, ranging from 100 Hz to 50 MHz. The model provides valuable insights during the design phase and was rigorously validated using data from 28 samples of an industrial machine.

Información de financiación

Financiadores

  • the Non-Doctoral Research Staff Training Programme of the Department of Education of the Basque Government
    • PRE-2021-2-0057 and PRE-2022-2-0001
  • the Department of Economic Development and Competitiveness of the Basque Government through Elkartek MAGAF
    • KK-2022/00073

Referencias bibliográficas

  • Morya, (2019), IEEE Trans. Transp. Electrif., 5, pp. 3, 10.1109/TTE.2019.2892807
  • Mazurck, (2003), Proceedings of the 2003 IEEE Bologna Power Tech Conference Proceedings, Volume 2, pp. 728, 10.1109/PTC.2003.1304637
  • Shen, (2019), IEEE Trans. Power Electron., 34, pp. 5606, 10.1109/TPEL.2018.2866338
  • Spadacini, (2017), Proceedings of the 2017 IEEE International Symposium on Electromagnetic Compatibility & Signal/Power Integrity (EMCSI), Volume 69, pp. 1
  • Robles, E., Fernandez, M., Ibarra, E., Andreu, J., and Kortabarria, I. (2019). Mitigation of common mode voltage issues in electric vehicle drive systems by means of an alternative AC-decoupling power converter topology. Energies, 12.
  • Robles, (2021), Renew. Sustain. Energy Rev., 140, pp. 110746, 10.1016/j.rser.2021.110746
  • Zhang, J., Shen, M., and Zhao, X. (2017). Study on the Effect of Inverter Modulation Methods and Operating Condition on Common Mode EMI for Motor Drive System, SAE. SAE Technical Papers.
  • Vostrov, (2021), IEEE Trans. Ind. Electron., 68, pp. 3805, 10.1109/TIE.2020.2984455
  • Weber, T. (2008, January 8–12). EMC filters in high voltage traction drive systems. Proceedings of the IEEE International Symposium on Electromagnetic Compatibility, Hamburg, Germany.
  • Zare, (2010), IET Electr. Power Appl., 4, pp. 727, 10.1049/iet-epa.2009.0305
  • Schinkel, (2006), Proceedings of the Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC ’06, Volume 2006, pp. 1181, 10.1109/APEC.2006.1620689
  • Almandoz, G., Zarate, S., Egea, A., Moreno, Y., Urdangarin, A., and Moreno, R. (2020, January 23–26). High Frequency Modeling of Electric Drives for Electromagnetic Compatibility Analysis. Proceedings of the 2020 International Conference on Electrical Machines (ICEM), Gothenburg, Sweden.
  • Hoffmann, A., and Ponick, B. (2020, January 24–26). Statistical Deviation of High-Frequency Lumped Model Parameters for Stator Windings in Three-Phase Electrical Machines. Proceedings of the 2020 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Sorrento, Italy.
  • Xiong, Y., Li, X., Li, Y., and Zhao, X. (2019, January 3–7). A High-frequency Motor Model Constructed Based on Vector Fitting Method. Proceedings of the 2019 Joint International Symposium on Electromagnetic Compatibility, Sapporo and Asia-Pacific International Symposium on Electromagnetic Compatibility (EMC Sapporo/APEMC), Sapporo, Japan.
  • Rahimi, A., and Kanzi, K. (2019, January 9–11). Improved High-Frequency Modeling of PMSM Using 3-D Finite Element Analysis. Proceedings of the 2019 International Power System Conference (PSC), Tehran, Iran.
  • Toulabi, (2019), IEEE Trans. Energy Convers., 34, pp. 1164, 10.1109/TEC.2019.2891349
  • Kwack, Y., Kim, H., Song, C., Moon, M., Kim, D.H., Kim, B., Kim, E., and Kim, J. (2015, January 26–29). EMI modeling method of interior permanent magnet synchronous motor for hybrid electric vehicle drive system considering parasitic and dynamic parameters. Proceedings of the 2015 Asia-Pacific Symposium on Electromagnetic Compatibility (APEMC), Taipei, Taiwan.
  • Ruiz-Sarrio, J.E., Chauvicourt, F., Gyselinck, J., and Martis, C. (2021, January 17–20). High-Frequency Modelling of Electrical Machine Windings Using Numerical Methods. Proceedings of the 2021 IEEE International Electric Machines & Drives Conference (IEMDC), Hartford, CT, USA.
  • Ruiz-Sarrió, J.E. (2022). High-Frequency Modelling of Rotating Electrical Machines. [Ph.D. Thesis, Technical University of Cluj-Napoca].
  • Mohammed, (2006), IEEE Trans. Magn., 42, pp. 1291, 10.1109/TMAG.2006.872412
  • Heidler, B., Brune, K., and Doppelbauer, M. (2015, January 10–13). High-frequency model and parameter identification of electrical machines using numerical simulations. Proceedings of the 2015 IEEE International Electric Machines & Drives Conference (IEMDC), Coeur d’Alene, ID, USA.
  • Jaritz, M., Jaeger, C., Bucher, M., Smajic, J., Vukovic, D., and Blume, S. (2019, January 13–15). An Improved Model for Circulating Bearing Currents in Inverter-Fed AC Machines. Proceedings of the 2019 IEEE International Conference on Industrial Technology (ICIT), Melbourne, VIC, Australia.
  • Behrendt, C.N., Dittmann, J., Knebusch, B., and Ponick, B. (2022, January 22–24). Common-Mode Impedance Prediction of a High Frequency Hairpin Stator Winding Based on FEM and Modified Nodal Analysis. Proceedings of the 2022 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Sorrento, Italy.
  • Jaritz, M., Stieger, N., Jaeger, C., Schneider, M., Vukovic, D., Blume, S., and Smajic, J. (2020, January 23–26). An Improved Model for the Common Mode Impedance in Inverter-Fed AC Machines. Proceedings of the 2020 International Conference on Electrical Machines (ICEM), Gothenburg, Sweden.
  • Ferreira, (2021), Electr. Power Syst. Res., 195, pp. 107155, 10.1016/j.epsr.2021.107155
  • Radja, (2019), IEEE Trans. Electromagn. Compat., 61, pp. 301, 10.1109/TEMC.2017.2787619
  • Maki, K., Funato, H., and Shao, L. (2009, January 3–6). Motor modeling for EMC simulation by 3-D electromagnetic field analysis. Proceedings of the 2009 IEEE International Electric Machines and Drives Conference, Miami, FL, USA.
  • Moreno, Y., Almandoz, G., Egea, A., Arribas, B., and Urdangarin, A. (2021). Analysis of Permanent Magnet Motors in High Frequency—A Review. Appl. Sci., 11.
  • Moreno, Y., Egea, A., Almandoz, G., Ugalde, G., Urdangarin, A., and Moreno, R. (2022, January 5–8). High-Frequency Modelling of Windings. Proceedings of the 2022 International Conference on Electrical Machines (ICEM), Valencia, Spain.
  • Zhu, (2022), IEEE Trans. Ind. Electron., 69, pp. 2402, 10.1109/TIE.2021.3065626
  • Smajic, (2017), Procedia Eng., 202, pp. 251, 10.1016/j.proeng.2017.09.712
  • Skutt, G.R., Lee, F.C., Chen, D., and Kohler, W. (1996). High-Frequency Dimensional Effects in Ferrite-Core Magnetic Devices. [Ph.D. Thesis, Virginia Polytechnic Institute and State University].
  • Abeywickrama, (2008), IEEE Trans. Magn., 44, pp. 438, 10.1109/TMAG.2007.914857