Effects of manufacturing tolerances of permanent magnets in fractional slot permanent magnet synchronous machines

  1. Zarate, Sergio 2
  2. Almandoz, Gaizka 2
  3. Ugalde, Gaizka 2
  4. Poza, Javier 2
  5. Escalada, Ana Julia 1
  1. 1 Orona EIC20120 Hernani Spain
  2. 2 Universidad de Mondragón/Mondragon Unibertsitatea
    info

    Universidad de Mondragón/Mondragon Unibertsitatea

    Mondragón, España

    ROR https://ror.org/00wvqgd19

Revista:
The Journal of Engineering

ISSN: 2051-3305,  2051-3305

Año de publicación: 2019

Volumen: 2019

Número: 17

Páginas: 4060-4064

Tipo: Artículo

DOI: 10.1049/JOE.2018.8199 GOOGLE SCHOLAR lock_openeBiltegia editor

Otras publicaciones en: The Journal of Engineering

Objetivos de desarrollo sostenible

Resumen

The fractional slot permanent magnet synchronous machines are well-known for their low torque ripple. However, in mass-production machines, not all the permanent magnets are identical due to the manufacturing tolerances and new torque harmonics could appear. In addition, the magnetic field is modified and unbalanced magnetic pull (UMP) could happen. Apart from that it is important to study the effect on vibrations since the magnetic field is no longer ideal. So, here, a study of the effect of unevenly magnetised permanent magnet distribution on torque ripples, unbalance magnetic pull, and vibrations is proposed. Apart from that, the tolerance grade sensitivity is studied. Finally, experimental tests show good agreement with finite element analysis.

Referencias bibliográficas

  • Gasparin L., (2009), IEEE Trans. Magn., 45, pp. 1210, 10.1109/TMAG.2009.2012561
  • Islam M.S., (2004), IEEE Trans. Ind. Appl., 40, pp. 813, 10.1109/TIA.2004.827469
  • Ge X., (2017), IEEE Trans. Ind. Appl., 53, pp. 3568, 10.1109/TIA.2017.2693264
  • Pina A., (2016), IEEE Trans. Ind. Appl., pp. 1
  • Ou J., (2017), IEEE Trans. Ind. Electron., pp. 1
  • Nakano M., (2015), IEEE Trans. Ind. Appl., 51, pp. 4372, 10.1109/TIA.2015.2443110
  • GeX. ZhuZ.Q.: ‘Sensitivity of manufacturing tolerances on cogging torque in interior permanent magnet machines with different slot/pole number’.2016 IEEE Energy Conversion Congress and Exposition (ECCE) Milwaukee USA 2016 pp.1–8
  • LeeD.H. JeongC.L. HurJ.: ‘Analysis of cogging torque and torque ripple according to unevenly magnetized permanent magnets pattern in PMSM’.2017 IEEE Energy Conversion Congress and Exposition (ECCE) Cincinnati USA 2017 pp.2433–2438
  • Leboeuf N., (2015), IEEE Trans. Ind. Electron., 62, pp. 3388
  • KimT. ChowdhuryM. IslamM.et al.: ‘Tolerance study to forecast performances of permanent magnet synchronous machines using segmented stator for mass production’.2016 IEEE Energy Conversion Congress and Exposition (ECCE) Milwaukee USA 2016 pp.1–6
  • Ortega A.P., (2017), IEEE Trans. Energy Convers., pp. 1
  • ZarateS. AlmandozG. UgaldeG.et al.: ‘Extended DQ model of a permanent magnet synchronous machine by including magnetic saturation and torque ripple effects’.2017 IEEE Int. Workshop of Electronics Control Measurement Signals and their Application to Mechatronics (ECMSM) Donostia‐San Sebastian Spain 2017 pp.1–6
  • Pyrhonen J., (2013), Design of rotating electrical machines, 10.1002/9781118701591
  • Dorrell D.G., (2010), Magn. IEEE Trans., 46, pp. 2675, 10.1109/TMAG.2010.2044582