Publicacions (74) Publicacions de Aitor Arbelaiz Garmendia

2024

  1. Bioinks Functionalized with Natural Extracts for 3D Printing

    Journal of Polymers and the Environment, Vol. 32, Núm. 2, pp. 982-999

  2. Walnut shells as cellulose nanocrystal source: isolation procedure and properties characterization

    Biomass Conversion and Biorefinery, Vol. 14, Núm. 15, pp. 17579-17587

2023

  1. Natural Fiber-Reinforced Cement Mortar Composite Physicomechanical Properties: From Cellulose Microfibers to Nanocellulose

    Journal of Materials in Civil Engineering, Vol. 35, Núm. 5

2022

  1. Biocomposites Based on Poly(Lactic Acid) Matrix and Reinforced with Lignocellulosic Fibers: The Effect of Fiber Type and Matrix Modification

    Journal of Natural Fibers, Vol. 19, Núm. 1, pp. 1-14

  2. Effect of Cellulose Nanofibers’ Structure and Incorporation Route in Waterborne Polyurethane–Urea Based Nanocomposite Inks

    Polymers, Vol. 14, Núm. 21

  3. Preparation and characterization of composites based on poly(lactic acid)/poly(methyl methacrylate) matrix and sisal fiber bundles: The effect of annealing process

    Journal of Thermoplastic Composite Materials, Vol. 35, Núm. 8, pp. 1132-1153

  4. The Importance of Coupling Agent on Tensile and Thermomechanical Performance of Annealed Composites Based on Poly(Lactic Acid)/Poly(Methyl Methacrylate) Matrix and Sisal Fiber Bundles

    Journal of Natural Fibers, Vol. 19, Núm. 13, pp. 6324-6334

  5. The Importance of Fiber/Matrix Adhesion and Annealing Process in Water Uptake of PLA/PMMA Matrix Composites Reinforced with Sisal Fibers: The Effect of Coupling Agent Addition

    Journal of Natural Fibers, Vol. 19, Núm. 15, pp. 11524-11535

2021

  1. Cellulose and graphene based polyurethane nanocomposites for fdm 3d printing: Filament properties and printability

    Polymers, Vol. 13, Núm. 5

  2. The effect of montmorillonite modification and the use of coupling agent on mechanical properties of polypropylene–clay nanocomposites

    Polymers and Polymer Composites, Vol. 29, Núm. 6, pp. 660-671

2020

  1. Influence of process parameters in graphene oxide obtention on the properties of mechanically strong alginate nanocomposites

    Materials, Vol. 13, Núm. 5

  2. Influence of the addition of PEG into PCL-based waterborne polyurethane-urea dispersions and films properties

    Journal of Applied Polymer Science, Vol. 137, Núm. 26

  3. The effect of the carboxylation degree on cellulose nanofibers and waterborne polyurethane/cellulose nanofiber nanocomposites properties

    Polymer Degradation and Stability, Vol. 173

  4. The use of alkali treated walnut shells as filler in plasticized poly(lactic acid) matrix composites

    Industrial Crops and Products, Vol. 145

  5. Thermomechanical recycling of polyamide 6 from fishing nets waste

    Journal of Applied Polymer Science, Vol. 137, Núm. 10

  6. Waterborne polyurethane and graphene/graphene oxide-based nanocomposites: Reinforcement and electrical conductivity

    Express Polymer Letters, Vol. 14, Núm. 11, pp. 1018-1033

2019

  1. Efecto de la incorporación de grafeno y óxido de grafeno en las propiedades de poliuretanos en base agua

    Polímeros para el siglo XXI: X Congreso de Jóvenes Investigadores en Polímeros (JIP 2019). Universidad de Burgos, 20-23 mayo de 2019 (Burgos, España)

2018

  1. Development of waterborne polyurethane-ureas added with plant extracts: Study of different incorporation routes and their influence on particle size, thermal, mechanical and antibacterial properties

    Progress in Organic Coatings, Vol. 117, pp. 76-90

  2. Different strategies for the preparation of nanocellulose composites with three-dimensional structure

    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY

  3. Evolution of the mechanical properties and estimation of the useful lifespan of poly(lactic acid) based compounds

    Polymer International, Vol. 67, Núm. 6, pp. 761-769