Publications dans lesquelles il/elle collabore avec Borja Fernández d'Arlas (41)

2024

  1. Chemical Composition and Mechanical Deformation Define Lamellar Sizes in Aliphatic Triblock-Based Polyurethane Elastomers

    Macromolecules

  2. Water-based and tannin-assisted liquid-phase exfoliation for a sustainable production of graphene

    Sustainable Materials and Technologies, Vol. 40

2022

  1. Self-assembly and crystallization of double crystalline aliphatic thermoplastic biopolyurethane and its nucleation with cellulose nanocrystals

    Polymer, Vol. 241

2016

  1. Extracción de la queratina de la lana de oveja "latxa"

    Revista Iberoamericana de Polímeros, Vol. 17, Núm. 3, pp. 110-121

  2. Structure-property relationship in high urethane density polyurethanes

    Journal of Polymer Science, Part B: Polymer Physics, Vol. 54, Núm. 7, pp. 739-746

  3. Synthesis and characterization of polyurethane rigid foams from soybean oil-based polyol and glycerol

    Journal of Renewable Materials, Vol. 4, Núm. 4, pp. 275-284

2015

  1. Caracterización estructural de poliuretanos segmentados elastoméricos bajo deformación uniaxial

    Anales de Química de la RSEQ, Núm. 2, pp. 83-91

  2. Comparison between exfoliated graphite, graphene oxide and multiwalled carbon nanotubes as reinforcing agents of a polyurethane elastomer

    Journal of Thermoplastic Composite Materials, Vol. 28, Núm. 5, pp. 705-716

  3. Estudio cinético de la síntesis en masa de poliuretanos de 1,6-hexamtilen diisocianato y distintos glicoles de baja masa molecular

    Afinidad: Revista de química teórica y aplicada, Vol. 72, Núm. 572, pp. 262-268

  4. Polyurethanes containing a crystalline polyol and semiflexible urethane segments

    Journal of Applied Polymer Science, Vol. 132, Núm. 3

  5. Relationship between reagents molar ratio and dispersion stability and film properties of waterborne polyurethanes

    Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 482, pp. 554-561

  6. Salting-Out Waterborne Catiomeric Polyurethanes for Drugs Encapsulation and Delivery

    Macromolecular Chemistry and Physics, Vol. 216, Núm. 19, pp. 1914-1924

  7. Studies on the morphology, properties and biocompatibility of aliphatic diisocyanate-polycarbonate polyurethanes

    Polymer Degradation and Stability, Vol. 122, pp. 153-160

  8. obtención de fibras de alginato mediante hilado por coagulación con sulfatos de metales multivalentes

    Revista Latinoamericana de Metalurgia y Materiales, Vol. 35, Núm. 2, pp. 189-200

2014

  1. Biostability of polyurethanes. Study from the viewpoint of microphase separated structure

    Polymer Degradation and Stability, Vol. 108, pp. 195-200

  2. Block architecture influence on the structure and mechanical performance of drawn polyurethane elastomers

    Polymer International, Vol. 63, Núm. 7, pp. 1278-1287

  3. Encapsulación de moléculas pequeñas mediante la precipitación salina de poliuretanos catioméricos

    Avances en Química, Vol. 9, Núm. 3, pp. 115-123

  4. Functionalization of multiwalled carbon nanotubes with urethane segments and their interaction with solvents and a polyurethane elastomer

    Journal of Nanoparticle Research, Vol. 16, Núm. 1

  5. Hacia la mímesis de la seda de araña a partir de poliuretanos con segmentos cortos de unidades rígidas y semiflexibles

    Revista Latinoamericana de Metalurgia y Materiales, Vol. 35, Núm. 1, pp. 39-48

  6. Morphology-properties relationship in high-renewable content polyurethanes

    Polymer Engineering and Science, Vol. 54, Núm. 10, pp. 2282-2291