Publikationen, an denen er mitarbeitet Roberto Palos Urrutia (35)

2024

  1. Hydrocracking of a HDPE/VGO Blend: Influence of Catalyst-to-Feed Ratio on Fuel Yield and Composition

    Catalysts, Vol. 14, Núm. 3

  2. Mechanistic Insight into Heteroatom Removal from Vacuum Gas Oil Blended with PMMA or PET Waste

    ChemSusChem

2023

  1. A six-lump kinetic model for HDPE/VGO blend hydrocracking

    Fuel, Vol. 333

  2. Comparative Study of Different Atmospheres for a PtPd/Y Catalyst Regeneration for Plastics/VGO Hydrocracking

    Chemical Engineering Transactions, Vol. 99, pp. 463-468

  3. Green Chemistry: From Wastes to Value-Added Products

    Processes

  4. Hydrocracking mechanisms of oxygenated plastics and vacuum gasoil blends

    Fuel Processing Technology, Vol. 248

  5. Industria-instalazioetako arriskuen analisia eta segurtasuna. Oinarrizko teoria

    Servicio Editorial = Argitalpen Zerbitzua

  6. Intensifying gasoline production in the hydrocracking of pre-hydrotreated light cycle oil by means of Pt and Pd supported on a spent FCC catalyst

    Fuel, Vol. 334

  7. Kinetic modeling of the hydrocracking of polystyrene blended with vacuum gasoil

    Chemical Engineering Journal, Vol. 451

  8. Study on the role of the reaction time in the upcycling of HDPE by co-hydrocracking it with VGO

    Journal of Analytical and Applied Pyrolysis, Vol. 170

2022

  1. Cracking of plastic pyrolysis oil over FCC equilibrium catalysts to produce fuels: Kinetic modeling

    Fuel, Vol. 316

  2. Enhancing the performance of a PtPd/HY catalyst for HDPE/VGO hydrocracking through zeolite desilication

    Fuel, Vol. 329

  3. Hydrogen Pressure as a Key Parameter to Control the Quality of the Naphtha Produced in the Hydrocracking of an HDPE/ VGO Blend

    Catalysts, Vol. 12, Núm. 5

  4. Kinetic modeling for the catalytic cracking of tires pyrolysis oil

    Fuel, Vol. 309

2021

  1. Detailed nature of tire pyrolysis oil blended with light cycle oil and its hydroprocessed products using a NiW/HY catalyst

    Waste Management, Vol. 128, pp. 36-44

  2. Different approaches to convert waste polyolefins into automotive fuels via hydrocracking with a NiW/HY catalyst

    Fuel Processing Technology, Vol. 220

  3. Product composition and coke deposition in the hydrocracking of polystyrene blended with vacuum gasoil

    Fuel Processing Technology, Vol. 224

  4. Waste Refinery: The Valorization of Waste Plastics and End-of-Life Tires in Refinery Units. A Review

    Energy and Fuels, Vol. 35, Núm. 5, pp. 3529-3557

2020

  1. Co-cracking of high-density polyethylene (HDPE) and vacuum gasoil (VGO) under refinery conditions

    Chemical Engineering Journal, Vol. 382

  2. Converting the Surplus of Low-Quality Naphtha into More Valuable Products by Feeding It to a Fluid Catalytic Cracking Unit

    Industrial and Engineering Chemistry Research, Vol. 59, Núm. 38, pp. 16868-16875