Publicacións nas que colabora con Roberto Aguado Zarraga (65)

2023

  1. Solid-fluid mixing behavior of conical spouted beds with internal devices

    Advanced Powder Technology, Vol. 34, Núm. 9

2021

  1. Global vision from the thermodynamics of the effect of the bio-oil composition and the reforming strategies in the H2 production and the energy requirement

    Energy Conversion and Management, Vol. 239

2020

  1. Effect of operating conditions on the drying of fine and ultrafine sand in a fountain confined conical spouted bed

    Drying Technology, Vol. 38, Núm. 11, pp. 1446-1461

  2. Effect of the solid inlet design on the continuous drying of fine and ultrafine sand in a fountain confined conical spouted bed

    Industrial and Engineering Chemistry Research, Vol. 59, Núm. 19, pp. 9233-9241

  3. Elutriation, attrition and segregation in a conical spouted bed with a fountain confiner

    Particuology, Vol. 51, pp. 35-44

2019

  1. Coupling gas flow pattern and kinetics for tyre pyrolysis modelling

    Chemical Engineering Science, Vol. 201, pp. 362-372

  2. Distribution of Cycle Times in Sawdust Conical Spouted Bed Equipped with Fountain Confiner and Draft Tube

    Industrial and Engineering Chemistry Research, Vol. 58, Núm. 5, pp. 1932-1940

  3. Implementation of a borescopic technique in a conical spouted bed for tracking spherical and irregular particles

    Chemical Engineering Journal, Vol. 374, pp. 39-48

  4. Influence of the kinetic scheme and heat balance on the modelling of biomass combustion in a conical spouted bed

    Energy, Vol. 175, pp. 758-767

2018

  1. A new fountain confinement device for fluidizing fine and ultrafine sands in conical spouted beds

    Powder Technology, Vol. 328, pp. 38-46

  2. Empirical Correlation for Calculating the Pressure Drop in Microhydrocyclones

    Industrial and Engineering Chemistry Research, Vol. 57, Núm. 42, pp. 14202-14212

  3. Kinetic modelling of pine sawdust combustion in a conical spouted bed reactor

    Fuel, Vol. 227, pp. 256-266

2017

  1. Correlations for calculating peak and spouting pressure drops in conical spouted beds of biomass

    Journal of the Taiwan Institute of Chemical Engineers, Vol. 80, pp. 678-685

  2. Fountain confined conical spouted beds

    Powder Technology, Vol. 312, pp. 334-346

2016

  1. Correlation for Calculating Heat Transfer Coefficient in Conical Spouted Beds

    Industrial and Engineering Chemistry Research, Vol. 55, Núm. 35, pp. 9524-9532

  2. Minimum spouting velocity for conical spouted beds of vegetable waste biomasses

    Journal of the Taiwan Institute of Chemical Engineers, Vol. 60, pp. 509-519

2015

  1. Fast characterization of biomass fuels by thermogravimetric analysis (TGA)

    Fuel, Vol. 140, pp. 744-751

  2. Influence of contactor geometry and draft tube configuration on the cycle time distribution in sawdust conical spouted beds

    Chemical Engineering Research and Design, Vol. 102, pp. 80-89

  3. Styrene recovery from polystyrene by flash pyrolysis in a conical spouted bed reactor

    Waste Management, Vol. 45, pp. 126-133

2014

  1. Principal component analysis for kinetic scheme proposal in the thermal and catalytic pyrolysis of waste tyres

    Chemical Engineering Science, Vol. 106, pp. 9-17