Publikationen in Zusammenarbeit mit Forschern von Universidad de Mondragón/Mondragon Unibertsitatea (78)

2024

  1. Correcting distortions of thin-walled machined parts by machine hammer peening

    Chinese Journal of Aeronautics, Vol. 37, Núm. 6, pp. 439-453

  2. Effect of the loading-rate and stress state on the constitutive modelling and fracture of 2205 Duplex stainless steel

    International Journal of Impact Engineering, Vol. 191

  3. Necking detection in stretch-bent materials exhibiting the Portevin-Le Chatelier effect

    Materials Research Proceedings

2023

  1. An automatic thermo-mechanical testing apparatus for metal forming applications

    International Journal of Impact Engineering, Vol. 182

2022

  1. Numerical analysis of AISI 321 alloy material parameters on rubber pad diaphragm forming

    International deep-drawing research group conference (IDDRG 2022)

  2. Numerical study of advanced friction modelling for sheet metal forming: Influence of the die local roughness

    Tribology International, Vol. 165

  3. Substitutive press‐bolster and press‐ram models for the virtual estimation of stamping‐tool cambering

    Materials, Vol. 15, Núm. 1

  4. Thematic Session 04: Metal Forming – Formability Characterization,Damage and Ductile Fracture

    Congress on Numerical Methods in Engineering CMN 2022 (2022. Las Palmas de Gran Canaria)

2021

  1. Contact pressure and sliding velocity ranges in sheet metal forming simulations

    ESAFORM 2021 - 24th International Conference on Material Forming

  2. Contact pressure, sliding velocity and viscosity dependent friction behavior of lubricants used in tube hydroforming processes

    ESAFORM 2021 - 24th International Conference on Material Forming

  3. Integral Design and Manufacturing Methodology of a Reduced-Scale Servo Press

    IEEE/ASME Transactions on Mechatronics, Vol. 26, Núm. 5, pp. 2418-2428

  4. New drawbead tester and numerical analysis of drawbead closure force

    International Journal of Advanced Manufacturing Technology, Vol. 116, Núm. 5-6, pp. 1855-1869

  5. Simulation of Cold Forging Processes Using a Mixed Isotropic-Kinematik Hardening Model

    Minerals, Metals and Materials Series

  6. The interaction between the sheet/tool surface texture and the friction/galling behaviour on aluminium deep drawing operations

    Metals, Vol. 11, Núm. 6

  7. Zeharkako ebaketa prozesuaren parametroen eragina erresistentziahandiko altzairuzko xafla lodietan

    Ingeniaritza eta arkitektura: IV. Ikergazte Nazioarteko Ikerteta Euskaraz. 2021eko ekainaren 9, 10 eta . Gasteiz, Euskal Herria.

2020

  1. Aluminum springback reduction by post-forming electric pulses

    Procedia Manufacturing

  2. Experimental and numerical simulation investigation on deep drawing process of inconel 718 with and without intermediate annealing thermal treatments

    Applied Sciences (Switzerland), Vol. 10, Núm. 2

  3. Real-Time Servo Press Force Estimation Based on Dual Particle Filter

    IEEE Transactions on Industrial Electronics, Vol. 67, Núm. 5, pp. 4088-4097

  4. Strain rate effect on the fracture behavior of the AA5754 aluminum alloy

    Procedia Manufacturing

  5. The effect of material surface roughness in aluminum forming

    Procedia Manufacturing