Publicacions (28) Publicacions de Aritz Esnaola Arruti

2024

  1. Definition of 3D Printing Parameters by the Design of Experiments to Characterise Carbon Fibre-Reinforced Polyamide

    Proceedings of the 17th International Conference on Industrial Engineering and Industrial Management (ICIEIM) – XXVII Congreso de Ingeniería de Organización (CIO2023), pp. 1-6

  2. Development of Flame-Retardant Polylactic Acid Formulations for Additive Manufacturing

    Polymers, Vol. 16, Núm. 8

  3. Impact behaviour of bio-inspired sandwich panels integrally manufactured from 3D printed continuous carbon fibre reinforced polyamide

    Composites Science and Technology, Vol. 250

  4. Low-velocity impact performance of integrally-3D printed continuous carbon fibre composite sandwich panels

    Materials Letters, Vol. 354

2023

  1. Desarrollo y validación de un proceso automático de fabricación de composites de fibra de vidrio

    Revista DYNA, Vol. 98, Núm. 5, pp. 451-455

  2. Design, manufacturing and testing of 3D printed variable-stiffness laminates for improved open-hole tensile behaviour

    Additive Manufacturing, Vol. 63

2022

  1. Efecto de la separación fibra-matriz sobre las propiedades mecánicas de una viga forjada en poliamida reforzada con fibra de vidrio = Effect of the fiber-matrix separation on the mechanical properties of a fiberglass reinforced polyamide forged beam

    Revista de Materiales Compuestos; Comunicaciones Matcomp21- Sostenibilidad y reciclaje - Fabricación, Vol. 7, Núm. 1, pp. 1-5

  2. Evaluation of the Maturity Level of Continuous Improvement Based on Improvement Routines: A Case Study of SMEs of Capital Goods

    Lecture Notes in Management and Industrial Engineering (Springer), pp. 257-266

2021

  1. Quasi-static and dynamic crush behaviour of 3D printed thin-walled profiles reinforced with continuous carbon and glass fibres

    Composites Part B: Engineering, Vol. 217

  2. The effect of cross-section geometry on crushing behaviour of 3D printed continuous carbon fibre reinforced polyamide profiles

    Composite Structures, Vol. 274

2020

  1. Analysis of axial crushing behaviour of unsaturated polyester and vinyl ester composites manufactured by out of die ultraviolet cured pultrusion

    ECCM 2018 - 18th European Conference on Composite Materials

  2. Characterization of elastic and resistance behaviours of 3D printed continuous carbon fibre reinforced thermoplastics

    ECCM 2018 - 18th European Conference on Composite Materials

  3. Continuous improvement framework to develop cultural change: case study, capital goods company

    TQM Journal, Vol. 32, Núm. 6, pp. 1327-1348

  4. Framework to evaluate continuous improvement process efficacy: A case study of a capital goods company

    Quality Innovation Prosperity, Vol. 24, Núm. 2, pp. 93-119

  5. Modelling of an additive 3D-printing process based on design of experiments methodology

    Quality Innovation Prosperity, Vol. 24, Núm. 1, pp. 128-151

2019

  1. Design and characterisation of cellular composite structures for automotive crash-boxes manufactured by out of die ultraviolet cured pultrusion

    Composites Part B: Engineering, Vol. 160, pp. 217-224

  2. Enhanced energy absorption properties in 3D printed polymer matrix composite

    ECCM 2018 - 18th European Conference on Composite Materials

  3. Over-3D printing of continuous carbon fibre composites on organo-sheet substrates

    AIP Conference Proceedings

  4. Ply and interlaminar behaviours of 3D printed continuous carbon fibre-reinforced thermoplastic laminates; effects of processing conditions and microstructure

    Additive Manufacturing, Vol. 30

2018

  1. Effect of the manufacturing process on the energy absorption capability of GFRP crush structures

    Composite Structures, Vol. 187, pp. 316-324