Publikationen, an denen er mitarbeitet Naiara Ortega Rodríguez (29)

2016

  1. Modelling of the hardening and finishing stages of grind-hardened workpieces

    International Journal of Advanced Manufacturing Technology, Vol. 82, Núm. 1-4, pp. 435-449

  2. Optimum electrode path generation for EDM manufacturing of aerospace components

    Robotics and Computer-Integrated Manufacturing, Vol. 37, pp. 273-281

2015

  1. Hardness control of grind-hardening and finishing grinding by means of area-based specific energy

    International Journal of Machine Tools and Manufacture, Vol. 88, pp. 24-33

2014

  1. Caracterización del proceso de descarga en electroerosión

    IMHE: Información de máquinas-herramienta, equipos y accesorios, Núm. 411, pp. 77-83

  2. Experimental study on micro EDM-drilling of Ti6Al4V using helical electrode

    Precision Engineering, Vol. 38, Núm. 4, pp. 821-827

  3. In-process prediction of the hardened layer in cylindrical traverse grind-hardening

    International Journal of Advanced Manufacturing Technology, Vol. 71, Núm. 1-4, pp. 101-108

  4. Modeling recast layer and surface finish in the manufacturing of high-aspect ratio micro-tools using the inverse slab electrical discharge milling process

    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 228, Núm. 4, pp. 553-562

  5. Por un rectificado ecológico

    IMHE: Información de máquinas-herramienta, equipos y accesorios, Núm. 412, pp. 20-28

2013

  1. Electrode set-up for EDM-drilling of large aspect-ratio microholes

    Procedia CIRP

  2. High-aspect ratio micro-pin manufacturing using inverse slab electrical discharge milling (ISEDM) process

    International Journal of Advanced Manufacturing Technology, Vol. 65, Núm. 9-12, pp. 1459-1469

  3. Influence of EDM parameters on slot machining in C1023 aeronautical alloy

    Procedia CIRP

  4. Reduction of oil and gas consumption in grinding technology using high pour-point lubricants

    Journal of Cleaner Production, Vol. 51, pp. 99-108

2012

  1. Analysis of micro-pin manufacturing using Inverse Slab Electrical Discharge Milling (ISEDM) process

    Key Engineering Materials

  2. Contact length estimation in grinding using thermocouple measurement and numerical simulation

    International Journal of Advanced Manufacturing Technology, Vol. 59, Núm. 1-4, pp. 83-91

  3. Industrial application of the MCG (minimum coolant grinding)technology

    Advanced Materials Research

  4. New technologies for increasing the capacities of WEDM machines

    Materials Science Forum

  5. Numerical prediction of heat affected layer in the EDM of aeronautical alloys

    Applied Surface Science, Vol. 259, pp. 780-790

  6. Two FEM thermal models for shallow and deep grinding

    Materials Science Forum

2011

  1. Analysis of EDD accuracy for profiling metal-bonded grinding wheels

    Advanced Materials Research

  2. Characterization of the response of embedded thermocouples in grinding

    Advanced Materials Research