Publications dans lesquelles il/elle collabore avec Gorka Urbikain Pelayo (71)

2024

  1. Effect of V concentration in TiSiN monolayer coating on chip formation mechanism and chip sliding velocity during dry turning of Ti–6Al–4V alloy

    Journal of Materials Research and Technology, Vol. 32, pp. 4456-4464

2023

  1. ANALYSIS OF THE INCLINATION OF SLOTS IN TEXTURED CERAMIC TOOLS THROUGH THE STUDY OF THE FINAL ROUGHNESS AND CUTTING FORCES DURING CUTTING OF COLD WORK TOOL STEEL

    MM Science Journal, Vol. 2023-November, pp. 6901-6908

  2. Influencia del ángulo de posición en el diseño del rompevirutas:: Estudio de herramientas de torneado dinámico y de alto avance en inconel® 718

    Revista DYNA, Vol. 98, Núm. 4, pp. 406-412

  3. Prediction of cutting forces including tool wear in high-feed turning of Nimonic® C-263 superalloy: A geometric distortion-based model

    Measurement: Journal of the International Measurement Confederation, Vol. 211

2022

  1. Stiffening near-net-shape functional parts of Inconel 718 LPBF considering material anisotropy and subsequent machining issues

    Mechanical Systems and Signal Processing, Vol. 168

  2. Using Machine-Learning techniques and Virtual Reality to design cutting tools for energy optimization in milling operations

    International Journal of Computer Integrated Manufacturing, Vol. 35, Núm. 9, pp. 951-971

2021

  1. Bridging the gap between student instruction and advanced research: Educational software tool for manufacturing learning

    Computer Applications in Engineering Education, Vol. 29, Núm. 1, pp. 274-286

  2. On the relationship between cutting forces and anisotropy features in the milling of LPBF Inconel 718 for near net shape parts

    International Journal of Machine Tools and Manufacture, Vol. 170

  3. Surface roughness prediction with new barrel-shape mills considering runout: Modelling and validation

    Measurement: Journal of the International Measurement Confederation, Vol. 173

  4. Turning Process with Ceramic Inserts of ADI Cast Material, Surface Analysis

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

2020

  1. CO2 cryogenic milling of Inconel 718: Cutting forces and tool wear

    Journal of Materials Research and Technology, Vol. 9, Núm. 4, pp. 8459-8468

  2. Combination of high feed turning with cryogenic cooling on Haynes 263 and Inconel 718 superalloys

    Journal of Manufacturing Processes, Vol. 58, pp. 208-222

  3. MoniThor: A complete monitoring tool for machining data acquisition based on FPGA programming

    SoftwareX, Vol. 11

  4. Semi-active magnetorheological damper device for chatter mitigation during milling of thin-floor components

    Applied Sciences (Switzerland), Vol. 10, Núm. 15

  5. Uncharted stable peninsula for multivariable milling tools by high-order homotopy perturbation method

    Applied Sciences (Switzerland), Vol. 10, Núm. 21, pp. 1-22

2019

  1. Burnishing of FSWAluminum Al-Cu-Li components

    Metals, Vol. 9, Núm. 2

  2. Manufacturing of human knee by cryogenic machining: Walking towards cleaner processes

    Procedia Manufacturing

  3. Prediction methods and experimental techniques for chatter avoidance in turning systems: A review

    Applied Sciences (Switzerland), Vol. 9, Núm. 21

  4. Process performance and life cycle assessment of friction drilling on dual-phase steel

    Journal of Cleaner Production, Vol. 213, pp. 1147-1156

  5. Sensitivity analysis of tool wear in drilling of Titanium Aluminides

    Metals, Vol. 9, Núm. 3