Publications en collaboration avec des chercheurs de Universidad de Deusto (33)

2024

  1. AA5754–Al2O3 Nanocomposite Prepared by Friction Stir Processing: Microstructural Evolution and Mechanical Performance

    Journal of Manufacturing and Materials Processing, Vol. 8, Núm. 2

  2. Analysis of super Cr13 stainless-steel internal fracture growth effects during skew mill piercing process

    Results in Engineering, Vol. 21

  3. Effect of warm forming process parameters on 42CrMo4 skew rolled bar mechanical properties and microstructure

    Archives of Civil and Mechanical Engineering , Vol. 24, Núm. 2

  4. Experimental investigation of the polymer-metal hybrids interfacial bonding fabricated by fused deposition modeling

    Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications

  5. Feasibility study on dissimilar joint between Alclad AA2024–T3 and DC04 steel by friction stir welding

    Materials Today Communications, Vol. 38

  6. Refill friction stir spot welding tool plunge depth effects on shear, peel, and fatigue properties of Alclad coated AA7075 aluminum joints

    International Journal of Fatigue, Vol. 185

  7. Thermal analysis of revolution pitch effects on friction stir welding of polypropylene

    International Journal of Advanced Manufacturing Technology, Vol. 130, Núm. 3-4, pp. 1421-1437

2023

  1. A Literature Survey on Electrical-Current-Assisted Friction Stir Welding

    Applied Sciences (Switzerland), Vol. 13, Núm. 3

  2. Cooling-assist friction stir welding: A case study on AA6068 aluminum alloy and copper joint

    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

  3. Effect of number of tool shoulders on the quality of steel to magnesium alloy dissimilar friction stir welds

    Archives of Civil and Mechanical Engineering, Vol. 23, Núm. 2

  4. Effects of Partial-Contact Tool Tilt Angle on Friction Stir Welded AA1050 Aluminum Joint Properties

    Materials, Vol. 16, Núm. 11

  5. Effects of process parameters on properties of friction stir additive manufactured copper

    International Journal of Advanced Manufacturing Technology, Vol. 127, Núm. 11-12, pp. 5651-5664

  6. Effects of shear bond on quality of Friction stir additive manufactured copper

    Materials Letters, Vol. 352

  7. Effects of skew rolling piercing process friction coefficient on tube twisting, strain rate and forming velocity

    Journal of Materials Research and Technology, Vol. 25, pp. 7254-7272

  8. Investigating the Effects of Geometrical Parameters of Re-Entrant Cells of Aluminum 7075-T651 Auxetic Structures on Fatigue Life

    Coatings, Vol. 13, Núm. 2

  9. Investigation on polypropylene friction stir joint: effects of tool tilt angle on heat flux, material flow and defect formation

    Journal of Materials Research and Technology, Vol. 23, pp. 715-729

  10. Microstructural and Mechanical Analysis of Seamless Pipes Made of Superaustenitic Stainless Steel Using Cross-Roll Piercing and Elongation

    Journal of Manufacturing and Materials Processing, Vol. 7, Núm. 5

  11. The effect of pin thread on material flow and mechanical properties in friction stir welding of AA6068 and pure copper

    Heliyon, Vol. 9, Núm. 4

  12. The effect of temperature and strain rate on the mechanical properties and microstructure of super Cr13 martensitic stainless steel

    Journal of Materials Research and Technology, Vol. 24, pp. 3464-3476

2022

  1. Effects of Tool-Workpiece Friction Condition on Energy Consumption during Piercing Phase of Seamless Tube Production

    Key Engineering Materials