Publikationen, an denen er mitarbeitet Patxi Xabier Aristimuño Osoro (14)

2021

  1. Measurement of plastic strain and plastic strain rate during orthogonal cutting for Ti-6Al-4V

    International Journal of Mechanical Sciences, Vol. 198

2020

  1. Surface drag analysis after Ti-6Al-4V orthogonal cutting using grid distortion

    Procedia CIRP

2019

  1. Determination of emissivity and temperature of tool rake face when cutting AISI 4140

    Procedia Manufacturing

  2. FEM modeling of hard turning 42CrMoS4 steel

    Procedia CIRP

  3. Influence of chip segmentation of Ti64 on the topography of the machined surface

    AIP Conference Proceedings

  4. Innovative Method dedicated to the development of a ferrite-pearlite grade regarding its MAChinability (IMMAC)

    Innovative Method dedicated to the development of a ferrite-pearlite grade regarding its MAChinability: final report

  5. Microstructure based flow stress model to predict machinability in ferrite–pearlite steels

    CIRP Annals, Vol. 68, Núm. 1, pp. 49-52

  6. Modelización por elementos finitos del torneado de aceros en estado templado

    Revista DYNA, Vol. 94, Núm. 3, pp. 331-337

2018

  1. Determining tool/chip temperatures from thermography measurements in metal cutting

    Applied Thermal Engineering, Vol. 145, pp. 305-314

  2. New calibration method to measure rake face temperature of the tool during dry orthogonal cutting using thermography

    Applied Thermal Engineering, Vol. 137, pp. 74-82

2017

  1. A Coupled Eulerian Lagrangian Model to Predict Fundamental Process Variables and Wear Rate on Ferrite-pearlite Steels

    Procedia CIRP

2015

  1. Finding Correlations between Tool Life and Fundamental Dry Cutting Tests in Finishing Turning of Steel

    Procedia Engineering

  2. Metal cutting experiments and modelling for improved determination of chip/tool contact temperature by infrared thermography

    CIRP Annals - Manufacturing Technology, Vol. 64, Núm. 1, pp. 57-60

  3. Uncertainty of temperature measurements in dry orthogonal cutting of titanium alloys

    Infrared Physics and Technology, Vol. 71, pp. 208-216