Vector Control and Direct Power Control Performance in Doubly Fed Induction Generator For Variable-Speed Wind Turbine

  1. Martinez de Alegría, I. 12
  2. Camblong, H. 2
  3. Ibañez, P. 3
  4. J. L. Villate 3
  5. J. Andreu 1
  1. 1 Universidad del País Vasco/Euskal Herriko Unibertsitatea
    info

    Universidad del País Vasco/Euskal Herriko Unibertsitatea

    Lejona, España

    ROR https://ror.org/000xsnr85

  2. 2 École Supérieure des Technologies Industrielles Avancées
    info

    École Supérieure des Technologies Industrielles Avancées

    Bidarte, Francia

    ROR https://ror.org/008kvxw43

  3. 3 Robotiker
Konferenzberichte:
EWEC 2003: European Wind Energy Conference

Datum der Publikation: 2003

Seiten: CD-ROM

Art: Konferenz-Beitrag

Zusammenfassung

This paper analyses the performance of a variable-speed wind turbine (VSWT) with a doubly fed induction generator (DFIG) when different control strategies are used in the rotor connected converter. For this purpose a model is implemented in Matlab-Simulink. The model is absolutely modular and it is possible to simulate the system with emphasis on different aspects as required. The rotor connected converter must control de DFIG rotor voltage in order to obtain the desired rotational speed and thus extract the maximum power available in the wind. However, if the rotor connected converter has high power losses, slow dynamic response or generates high torque pulsations the benefits of the DFIG configuration may not be cost effective. State of art SVM control techniques are compared with DTC-DPC control techniques. In order to achieve maximum power extraction a higher level controller is implemented. This controller generates de active power, torque and reactive power references for the SVM and DPC controllers.